ProMaster 2500
V8.7 User Notes
Contents
What’s New in Version 8.7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Reminders
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Creating Floppy Diskette Set from CD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Quick Update Steps
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Note:
You do not need to update your software if you received these User Notes
with a new programmer.
To use this update, your ProMaster 2500 must have a minimum of 2 MB of
RAM available (displayed at the top of the ProMaster 2500 screen).
However, to make maximum use of the programmer, 8 MB of RAM is
required. If you need additional RAM, call your Customer Support office as
listed in the Preface of your User Manual. In the U.S., call 1-800-332-8246.
IMPORTANT: TaskLink
™
DOS users need to upgrade to V2.09 or
greater in order to have access to all supports in this UniFam V8.7
software update. Version 2.09 of TaskLink DOS is available on the
UniFam V8.7 CD or from the Data I/O Web site. See Readme.txt in
the TaskLink DOS directory for installation instructions.
IMPORTANT: For issues regarding floppy diskette support, see
“Creating Floppy Diskette Set from CD” on page 7.
984-1028-046
®
