i
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
BEFORE USING THE PRODUCT, BE SURE TO READ
THE FOLLOWING:
● Perform work in accordance with the instructions herein stated.
Instructions for work are explained by paying attention to the aspect of accident
prevention. Failing to perform work as per the instructions can cause accidents.
In the case where only those who have technical expertise should perform the
work to avoid hazardous situation, the instructions herein state that the technical
personnel should perform such work.
● Always turn off the power before working on the machine.
Be sure to turn off the power and unplug the power cable before carrying out any
work that requires direct contact with the interior of the product. If the work is to
be performed in the power-on status, this manual always states so.
● Be sure to ground the earth terminal.
This product is equipped with the earth terminal. When installing the product,
make sure that the earth wire is grounded, and connect the terminal to the wire.
Unless the product is grounded appropriately, people can be subject to an electric
shock. After performing repair, etc. for the control equipment, ensure that the earth
wire is firmly connected to the control equipment.
● Ensure that the power supply used is equipped with an earth leakage breaker.
Using a power supply which is not equipped with the earth leakage breaker can
cause a fire when earth leakage occurs.
● Specification changes not designated by DARTSLIVE are not allowed.
The parts of the product include warning labels for safety, covers for personal
protection, etc. It is very hazardous to operate the product by removing parts and/
or modifying the circuits. Doing so may cause fire or electric shock. Should doors,
lids and protective parts be damaged or lost, refrain from operating the product,
and contact your product retailer.
DARTSLIVE shall not be held responsible for any accidents or compensation for
damage to a third party, resulting from the specifications not designated by
DARTSLIVE.
● Be sure to check for electrical specifications.
Ensure that the product is compatible with the power supply voltage and
frequency requirements of the location.
The product has a nameplate on which electrical specifications are described.
Using any electrical specifications different from the designated specifications can
cause a fire and an electric shock.
● Install and operate the product in places where appropriate lighting is available,
allowing warning labels to be clearly read.
To ensure safety for the customers, labels and printed instructions describing
potentially hazardous situations are applied to places where accidents can be
caused. Ensure that where the product is operated has sufficient lighting allowing
the warnings to be read. If any label is peeled off, apply it again immediately.
Please place an order with your product retailer.
● Be sure to adjust the monitor properly.
Do not operate the product leaving on-screen flickering or blurring as it is. Using
the product with the monitor not properly adjusted may cause dizziness or a
headache to the players and the people around them.
