INSTALLATION INSTRUCTIONS
LAT-NR310
LED Tail Lights for 1969 Chevelle
MAN#650207
Kit includes:
Installation:
1. Remove the tail light housing from the vehicle.
2. Remove the bulb connector from the back of the housing.
3. Remove the 4 screws that hold the trim and lens. Remove the trim and tail light lens from the
tail light housing.
4. Now is a good time to clean or replace the lens and housing if necessary.
5. Note that there are two different LED assemblies. One for the driver side and one for the
passenger side. Select the correct assembly for the tail light housing. Remove the two locking
nuts and flat aluminum plate from the back of the new LED assembly.
Left or driver’s
side LED assembly.
Right or passenger’s
side LED assembly.
