background image

  

    

Our continuing commitment to quality products may mean a change in specifications without notice.

 ©  2015-2019   

                                        

                   

5151 San Felipe St., Suite 500, Houston, TX  77056

 

www.daikincomfort.com

DV**PEC / DV**FEC

 

(EEV SERIES AIR HANDLERS)

IOD-4018J
11/2019

INSTALLATION INSTRUCTIONS

1  Important Safety Instructions ...............................................................2

2  Shipping Inspection ...............................................................................3

2.1 Parts ........................................................................................................3

2.2 Handling ..................................................................................................3

3  Codes & Regulations .............................................................................3

4  Replacement Parts.................................................................................3

5   Pre-Installation Considerations ...........................................................3

5.1 Preparation ..............................................................................................3

5.2 System Matches ......................................................................................3

5.3 Interconnecting Tubing ............................................................................3

5.4 Clearances ..............................................................................................3

5.5 Horizontal Applications ............................................................................3

6   Installation Location .............................................................................4

6.1 Upflow Installation

 ...................................................................................4

6.2 Horizontal Left Installation .......................................................................4

6.3 Downflow/Horizontal Right Installation

 ....................................................4

7  Refrigerant Lines ...................................................................................7

7.1 Tubing Size ..............................................................................................7

7.2 Tubing Preparation ..................................................................................7

7.3 Tubing Connections .................................................................................8

8  Condensate Drain Lines ........................................................................8

9 Ductwork.................................................................................................9

9.1 Return Ductwork

 ......................................................................................9

10  Return Air Filters ..................................................................................9

11  Electric Heat .........................................................................................9

12  Electrical and Control Wiring ............................................................ 11

12.1 Building Electrical Service Inspection .................................................. 11

12.2 Wire Sizing .......................................................................................... 11

12.3 Maximum Overcurrent Protection (MOP) ............................................ 11

12.4 Electrical Connections – Supply Voltage ............................................. 11

12.4.1 Air Handler Only (Non-Heat Kit Models) ........................................... 11

12.4.2 Air Handler - Non-Circuit Breaker Heat Kits

 ..................................... 11

12.4.3 Air Handler With Circuit Breaker Heat Kit

 ......................................... 11

13  Achieving 1.4% & 2% Low Leakage Rate ........................................12

14  Airflow Trim

 ........................................................................................12

15  Miscellaneous Start-Up Checklist ....................................................12

15.1 Auxiliary Alarm Switch

 .........................................................................13

15.2 Circulator Blower

 .................................................................................14

15.3 Motor Orientation .................................................................................14

15.4 Accessory Contacts .............................................................................14

16  Troubleshooting

 ..................................................................................15

16.1  Electrostatic Discharge (ESD) Precautions  .......................................15

16.2  Diagnostic Chart .................................................................................15

16.3  Fault Recall

.........................................................................................15

17  Fully Communicating Daikin System ................................................16

17.1 Overview

..............................................................................................16

17.2 Airflow Consideration

 ...........................................................................16

17.3 Thermostat Wiring ...............................................................................16

17.3.1 Two-Wire Outdoor and Four-Wire Indoor Wiring .........................16

17.4 Network Troubleshooting

 .....................................................................16

17.5 System Troubleshooting ......................................................................17

Troubleshooting

 ........................................................................................18

Diagnostic Codes ......................................................................................21

Setting the mode display ..........................................................................22

Wiring Diagram ..........................................................................................24

Routine Maintenance ................................................................................25

NOTICE

If  an “Ed” error is encountered 

on startup, verify that the 

electric heater DIP switches 

have been set to the appropriate 

heater size.  See Tables 9 and 10 

for the heater kit airflow delivery 

and DIP switch settings.

Only personnel that have been trained to install, adjust, service or 

repair (hereinafter, “service”) the equipment specified in this manual 

should service the equipment. The manufacturer will not be 

responsible for any injury or property damage arising from improper 

service or service procedures.  If you service this unit, you assume 

responsibility for any injury or property damage which may result.  In 

addition, in jurisdictions that require one or more licenses to service 

the equipment specified in this manual, only licensed personnel 

should service the equipment.  Improper installation, adjustment, 

servicing or repair of the equipment specified in this manual, or 

attempting to install, adjust, service or repair the equipment specified 

in this manual without proper training may result in product damage, 

property damage, personal injury or death.

RECOGNIZE THIS SYMBOL 

 

AS A SAFETY PRECAUTION.

Cancer and Reproductive Harm

 -

www.P65Warnings.ca.gov

PROP 65 WARNING

FOR CALIFORNIA CONSUMERS

0140M00517-A

Summary of Contents for DV FEC Series





























Reviews: