background image

IO-4005

08/2022

CONTENTS

1 Important Safety Instructions

 .............................Pg. 1

2 Shipping Inspection

  ...........................................Pg. 2

3 Codes & Regulations

 ..........................................Pg. 2

4 Replacement Parts

 ..............................................Pg. 2

5 Pre- Installation Instructions

 ..............................Pg. 2

5.1 Preparation ......................................................Pg. 2

5.2 System Matches ..............................................Pg. 2

5.3 Interconnecting Tubing ....................................Pg. 3

6 Application Information

 ......................................Pg. 3

6.1 Wire Sizing  ......................................................Pg. 3

6.2 Maximum Overcurrent Protection (MOP)  ........Pg. 4

6.3 Electrical Connections-Supply Voltage ............Pg. 4

6.4 Fresh Air Openings  .........................................Pg. 4

7 AWST-Factory Installed TXV Models

  ................Pg. 4 

7.1 Tubing Size  .....................................................Pg. 4

7.2 Tubing Connection  ..........................................Pg. 4

7.3 Thermal Expansion Valve System Adjustment Pg. 5

8 Maintenance Check

  ............................................Pg. 5

9 Wiring Diagrams and Air Flow Data

 ...................Pg. 6

9.1 Low Voltage Connection  .................................Pg. 6

10 Trouble Shooting 

 ..............................................Pg. 11

VERTICAL MOUNT AIR HANDLERS

INSTALLATION INSTRUCTIONS & OPERATING INSTRUCTIONS

© 2022 

19001 Kermier Rd., Waller, TX  77484

www.daikinac.com

P/N: IO-4005     Date:  August 2022

WARNING

HIGH VOLTAGE

DISCONNECT ALL POWER BEFORE SERVICING 

OR INSTALLING THIS UNIT.  MULTIPLE POWER 

SOURCES MAY BE PRESENT.  FAILURE TO DO SO 

MAY CAUSE PROPERTY DAMAGE, PERSONAL 

INJURY OR DEATH.

ONLY PERSONNEL THAT HAVE BEEN TRAINED TO INSTALL, 

ADJUST, SERVICE OR REPAIR(HEREINAFTER, “SERVICE”) 

THE EQUIPMENT SPECIFIED IN THIS MANUAL SHOULD  

SERVICE THE EQUIPMENT.  THE MANUFACTURER WILL 

NOT BE RESPONSIBLE FOR ANY INJURY OR PROPERTY 

DAMAGE ARISING FROM IMPROPER SERVICE OR SERVICE 

PROCEDURES.  IF YOU SERVICE THIS UNIT, YOU ASSUME 

RESPONSIBILITY FOR ANY INJURY OR PROPERTY  

DAMAGE WHICH MAY RESULT.  IN ADDITION, IN 

 

JURISDICTIONS THAT REQUIRE ONE OR MORE LICENSES 

TO SERVICE THE EQUIPMENT SPECIFIED IN THIS  

MANUAL, ONLY LICENSED PERSONNEL SHOULD SERVICE 

THE EQUIPMENT.   

IMPROPER INSTALLATION, ADJUSTMENT, SERVICING OR 

REPAIR OF THE EQUIPMENT SPECIFIED IN THIS MANUAL, 

OR ATTEMPTING TO INSTALL, ADJUST, SERVICE OR REPAIR 

THE EQUIPMENT SPECIFIED IN THIS MANUAL WITHOUT 

PROPER TRAINING MAY RESULT IN PRODUCT DAMAGE, 

PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.

WARNING

WARNING

TO PREVENT THE RISK OF PROPERTY DAMAGE, PERSONAL 

INJURY, OR DEATH, DO NOT STORE COMBUSTIBLE MATERI

-

ALS OR USE GASOLINE OR OTHER FLAMABLE LIQUIDS  OR 

VAPORS IN THE VICINITY OF THIS APPLIANCE.

CAUTION

HAVE YOUR CONTRACTOR IDENTIFY ALL THE VARIOUS CUT 

OFF SWITCHESAND DEVICES THAT SERVICE THIS UNIT. 

KNOW WHERE THE SWITCH IS THAT WILL CUT OFF ENERGY 

TO THE HEATING SYSTEM IN THE EVENT OF OVERHEATING.

CAUTION

THIS APPLIANCE IS NOT INTENDED FOR THE USE BY PER-

SONS (INCLUDING CHILDREN) WITH THE REDUCED PHYSICAL, 

SENSORY OR MENTAL CAPABILITIES, OR LACK OF EXPERI

-

ENCE AND KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN 

SUPERVISION OR INSTRUCTION CONCERNING USE OF THE 

APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY. 

CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY 

DO NOT PLAY WITH THE APPLIANCE.

  

WARNING

THIS UNIT SHOULD NOT BE CONNECTED TO, OR USED IN 

CONJUNCTION WITH, ANY DEVICES THAT ARE NOT DESIGN 

CERTIFIED FOR USE WITH THIS UNIT OR HAVE NOT BEEN 

TESTED AND APPROVED BY THE MANUFACTURER. SERIOUS 

PROPERTY DAMAGE OR PERSONAL INJURY, REDUCED UNIT 

PERFORMANCE AND/OR HAZARDOUS CONDITIONS MAY 

RESULT FROM THE USE OF DEVICES THAT HAVE NOT BEEN 

APPROVED OR CERTIFIED BY THE MANUFACTURER.

1 Important Safety Instructions

As a professional installer, you have an obligation to know 

the product better than the customer. This includes all safety 

precautions and related items. Prior to actual installation, 

 

thoroughly familiarize  yourself  with  this  Instruction Manual. 

Pay special attention to all safety warnings.  Remember,  it  is  

your  responsibility  to  install  the product safely and to know it 

well enough to be able to instruct a customer in its safe use.
Safety is a matter of common sense...a matter of thinking  before  

acting.  Most  dealers  have  a  list  of  specific, good safety 

practices...follow them.
The precautions listed in this Installation Manual are in- tended 

as supplemental to existing practices. However, if  there  is  a  

direct  conflict  between  existing  practices and  the  content  

of  this  manual,  the  precautions  listed here take precedence.

Summary of Contents for AWST18SU14 AA Series

















Reviews: