background image

PRODUCT FEATURES

DWR-WE5413WC/SC/RC
DWR-WE6413WC/SC/RC

Electric and Gas Dryer

A NOTE TO YOU

Thank you for purchasing a DAEWOO Dryer.
Please read this manual carefully, as it provides instructions
on safe installation, use, and maintenance
Record the model and serial numbers,and retain the manual for future reference.
For more information, please visit our website at http://www.e-daewoo.com

"

OUTSTANDING PERFORMANCE

Besides the large capacity, you can benefit from faster drying time, quiet
operation, and energy efficiency.

"

STAINLESS STEEL DRUM

Stainless steel drum resists rust.

"

DIGITAL FABRIC CARE

Multi-Level temperature control takes better care of your clothes.

"

EASE OF USE

An entire selection of user-friendly functions make operating the dryer

easier.

"

ONE TOUCH SELECTIONS

To choose an option, press its button once. No need to press buttons multiple times to scroll through a list

of options.

Your dryer provides sensor drying and time drying programs.

Sensor Dry
The dryer senses the dampness of the laundry and automatically determines the heat level and operation
time. You might see a sudden increase or decrease in operation time if the sensor determines more or less
drying is required. This is not a malfunction.

Time Dry
Use TIME DRY to select heat level and drying time manually. This can be used if clothes are not as dry as
you like them at the end of the cycle. Use TIME DRY for heavy and bulky items and thick work.

What are Sensor Dry and Time Dry?

CONTACT INFORMATION

Website : http://www.e-daewoo.com

Call : 1-877-393-7823(1-877-DWESVC3)

Summary of Contents for DWR-WE5413RC









































Reviews: