Manufactured under license of
Daewoo International Corporation
, Korea
www.daewoopowerproducts.com
USER'S MANUAL
DAX
8K
Jump Starter
1. SPECIFICATIONS
Battery capacity: 7500 mAh
Starting current: 200 A
Max current: 400 A
DC charge input: 5 V 1 A / 2.1 A
Rated USB output: 5 V / max 2.4 A
Environmental temperature: -25 ° to 40° C
2. SAFETY INFORMATION
Please read this entire manual before attempting to use this product.
WARNING
Avoid dangerous environments. Do not charge this item in rain, snow, damp or wet environments.
Do not use this item or charger in the presence of explosive atmospheres (gaseous fumes, dust or
flammable materials) since sparks may be generated when inserting or removing this item, possibly
causing fire. Charge in a well-ventilated area. Do not allow smoking or open flames near a charging
battery. Vented gases may explode. Do not burn or incinerate this item. This item may explode,
causing personal injury or damage. Toxic fumes and materials are created when batteries are
burned. Do not crush, drop or damage this item. Do not use this item or a battery charger that has
received a sharp blow, been dropped, run over or damaged in any way (e.g. pierced with a nail, hit
with a hammer or stepped on). Do not disassemble. Disassembly may result in the risk of electric
shock, fire or exposure to battery chemicals. Battery chemicals cause serious burns. Never allow
contact with skin, eyes or mouth. If this item leaks battery chemicals, use rubber or neoprene gloves
to dispose of it. If skin is exposed to battery fluids, wash with soap and water and rinse with vinegar.
If eyes are exposed to battery chemicals, immediately flush with water for 20 minutes and seek
medical attention. Remove and dispose of contaminated clothing. Do not short circuit. This item will
short circuit if a metal object makes connection to the power cable port. Do not place this item near
anything that may cause a short circuit, such as coins, keys or nails. A short-circuited battery may
cause fire and personal injury. Never charge or jump start a frozen battery. Store this item and
charger in a cool dry place. Do not store this unit for more than 10 days where temperatures may
exceed 120 Degrees F (50 Degrees C) such as direct sunlight, a vehicle, or metal building during the
summer as it may cause damage to the unit. This product is intended for private use only and
should not be used in any commercial applications. Use of this product to start multiple vehicles
over a short period of time may damage the jump starter/charger. When jump starting your vehicle
do not place Jump Starter on the ground or at a height less than 18 inches.
OPERATING INSTRUCTIONS
Make sure power level is above 50% before use:
1. Plug the blue connector into the 12V Jump Starter port (A); LED (B) illuminates red.
2. Connect the red damp to positive '+' on the vehicle's battery. Connect the black clamp to negati-
ve '-' on the vehicles battery. lf connected correctly LED (B) illuminates green. lf LED flashes red it's
more than likely the clamps have been incorrectly connected, remove clamps & connect correctly,
the LED should now be green. Even if with the clamps connected correctly the LED flashes red,
remove the red clamp & re-connect to reset.
3. If Green, proceed to start vehicle.
4. Once the vehicle has started and the LED flashes green, disconnect the clamps from the vehicle's
battery and then remove the jumper cables from the jump starter.
Recharging the Jump starter
To charge the jump starter, connect (A) with (E) then plug into any USB charging port (not included)
or with 12V charger (C). The four Indicator lights will flash. When the four Indicator lights are solid
illuminated, the jump starter battery is completely charged.
3. TROUBLESHOOTING
1. Disconnect the Jump starter within 30 seconds after starting your car.
2. Do not connect the red clamp and black clamp directly.
3. Do not disassemble the machine.
4. IMPORTANT SAFETY INSTRUCTIONS WARNING
When using this product, basic precautions should always be followed, including the following:
a) Read all the instructions prior to using the product.
b) To reduce the risk of injury, close supervision is necessary when the product is used near chil-
dren.
c) Do not put fingers or hands into the product.
d) Use of an attachment not recommended or sold by jump starter manufacturer may result in a risk
of fire, electric shock, or injury to persons.
e) To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when
disconnecting the jump starter.
f) Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batte-
ries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
h) Do not operate the jump starter with a damaged cord or plug, or a damaged output cable.
i) Do not disassemble the jump starter, take it to a qualified service person when service or repair is
required. Incorrect reassembly may result in a risk of fire or electric shock.
j) To reduce the risk of electric shock, unplug the jump starter form the outlet before attempting any
instructed servicing.
k) WARNING - RISK OF EXPLOSIVE GASES.
1) Working in vicinity of a lead acid battery is dangerous. Batteries generate explosive gases during
normal battery operation. For this reason, it is of the utmost importance that you follow the instruc-
tions each time you use the jump starter.
2) To reduce risk of battery explosion, follow these instructions and those published by battery
manufacturer and manufacturer of any equipment you intend to use in vicinity of the battery. Review
cautionary marking on these products and on engine.
l) PERSONAL PRECAUTIONS
1) Consider having someone close enough by to come to your aid when you work near a lead-acid
battery.
2) Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.
3) Wear complete eye protection and clothing protection. Avoid touching eyes while working near
battery.
4) If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye,
immediately flood eye with running cold water for at least 10 minutes and get medical attention
immediately.
5) Never smoke or allow a spark or flame in vicinity of battery or engine.
6) Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-cir-
cuit battery or other electrical part that may cause explosion.
7) Remove personal metal items such as rings, bracelets, necklaces, and watches when working
with a lead-acid battery. A lead-acid battery can produce a short-circuit current high enough to
weld a ring or the like to metal, causing a severe burn.
m) When charging the internal battery, work in a well ventilated area and do not restrict ventilation in
any way.
n) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
o) Do not expose a jump starter. Do not expose a jump starter to fire or excessive temperature.
Exposure to fire or temperature above 130°C/265°F may cause explosion.
p) Have servicing performed by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the product is maintained.
q) Attach output cables to a battery and chassis as indicated below. Never allow the output clamps
to touch one another.
1) Instructions shall include step by step directions for the proper use of the booster function detai-
ling the correct steps to connect and disconnect the booster cables to the battery.
5. FEATURES
