background image

 
 
 
 

 
 
 
 

Before You Begin 

DVG-G1402S

Wireless VoIP Router

This product can be set up using 
any current web browser, i.e., 
Internet Explorer 6 or Netscape 
Navigator 6.2.3. 

1.

 

If you purchased this Router to share your high-speed Internet connection with other 
computers, you must have an established Internet account from an Internet Service 
Provider (ISP). 

2.

 

It’s best to use the same computer that is connected to your router for configuring the 
DVG-G1402S Wireless VoIP Router. The DVG-G1402S acts as a DHCP server and 
will assign all the necessary IP address information on your network. See the Quick 
Installation Guide or the Manual on the CD-ROM for setting each network adapter to 
automatically obtain an IP address.

 

©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of 
their respective holders. Software and specifications subject to change without notice. DVG-G1402S 
Wireless VoIP Router 

 

Check Your Package Contents 

 

    

 

 

DVG-G1402S 

shown with antenna 

 
 

 

CD-ROM 

containing Manual and Warranty 

 
 

 

Ethernet Cable 

(CAT5 UTP Straight-Through)

 

 
 

Using a power adapter with 
a different voltage rating

 

will 

damage and void the

 

warranty for this product.

 

 

 

12V, 1.2A 

Power Adapter

 
 
 
 
 

If any of the above items is missing, please contact your reseller. 

Summary of Contents for DVG-G1402S - Wireless Broadband VoIP Router

























Reviews: