Relay Control
RELAYIO6
Quick Reference Guide
CyberPower Systems (USA), Inc.
4241 12th Avenue East Suite 400 Shakopee, MN 55379
Phone: 877-297-6937
Fax: 952-403-0009
www.CPSww.com
Relay Control Card
RELAYIO600
Quick Reference Guide
CyberPower Systems (USA), Inc.
4241 12th Avenue East Suite 400 Shakopee, MN 55379
Card
K01-0000427-00
Overview
The CyberPower Relay Control Card (
solution for UPS status monitoring and local device control
relays. In addition, the RELAYIO600
UPS shutdown in battery mode
CyberPower Online UPS system
Installation Guide
Notice: The UPS can remain on when installing the
1.
Remove the two retaining screws of the expansion port cover then
remove the cover.
2.
Install the CyberPower
3.
Re-install and tighten the retaining screws.
Technical Specifications
Electrical
External S/D Voltage
Power Dissipation
Physical
Dimensions (HxWxD)
Weight
Environmental
Operating Temperature
Operating Humidity
The CyberPower Relay Control Card (RELAYIO600) offers users
solution for UPS status monitoring and local device control
RELAYIO600 provides 1 input contact to perform
in battery mode. This card is compatible with
systems with an expansion port.
Installation Guide
Notice: The UPS can remain on when installing the RELAYIO600 card
two retaining screws of the expansion port cover then
Install the CyberPower RELAYIO600 card into the expansion port.
install and tighten the retaining screws.
Technical Specifications
RELAYIO600
External S/D Voltage
7.5 - 12V
1.35W Max
(Default 12V input)
Dimensions (HxWxD)
43 x 67 x 155
1.7 x 2.64 x 6.13
88.6 g / 3.13 oz
Operating Temperature
0 - 40
℃
32 - 104
℉
0 to 95%
) offers users a
solution for UPS status monitoring and local device control via 5 output
1 input contact to perform
This card is compatible with
expansion port.
RELAYIO600 card.
two retaining screws of the expansion port cover then
into the expansion port.
12V
1.35W Max
(Default 12V input)
55.7 mm
6.13 in
88.6 g / 3.13 oz
℃
℉
0 to 95%
Internal Circuit-DB9
I/O Pinout Definition-DB9
PIN
Assignment
Function
I/O
Jumper
PIN 1
UPS FAIL
O/P
JP1
PIN 2
SUMMARY ALARM
O/P
JP2
PIN 3
GND (Common for PIN 4) Power GND
N/A
PIN 4
REMOTE SHUTDOWN
Power + Vcc
N/A
PIN 5
COMMON (For Relays)
O/P
N/A
PIN 6
BYPASS / UPS OFF
O/P
N/A
PIN 7
BATTERY LOW
O/P
JP3
PIN 8
UPS ON
O/P
N/A
PIN 9
POWER FAIL
O/P
JP4
Note1: Relay contact PIN 1/2/7/9 can be configured as Normally Open (NO)
or Normally Closed (NC).
Note2: Please see the Function Description section for details on jumper
position settings.
Internal Circuit-Terminal Block
I/O Pinout Definition-Terminal Block
Terminal
Assignment
Function
I/O
Jumper
T1
REMOTE SHUTDOWN
Power + Vcc
N/A
T2
GND (Common for PIN 4) Power GND
N/A
T3
SUMMARY ALARM
O/P
JP2
T4
BYPASS / UPS OFF
O/P
N/A
T5
BATTERY LOW
O/P
JP3
T6
POWER FAIL
O/P
JP4
T7
UPS ON
O/P
N/A
T8
UPS FAIL
O/P
JP1
T9
COMMON (For Relays)
O/P
N/A
T10
COMMON (For Relays)
O/P
N/A
Note1:
Relay contact T3/5/6/8 can be configured as Normally Open (NO) or
Normally Closed (NC).
Note2:
Please see the Function Description section for details on jumper
position settings.
