15.6” LCD TV
WITH DVD PLAYER
QUICK START GUIDE
C15DVDB10
Unpacking
1
1
Connecting the Aerial
4
4
Installing the Base Stand
2
2
Operating Your Remote Control
3
3
6
6
Connecting to the Mains Socket
5
5
Turning the TV on for the first time
Remove all packaging from the TV. Retain the packaging. If you dispose of it please
do so according to any local regulations.
1. Plug in the mains plug into the mains socket after you have completed all the
connections.
2. Switch on the POWER ON/OFF switch at the bottom of the TV. At this stage, the
TV switches to standby mode. The red LED indicator will illuminate on the front
panel of the TV.
3. Press the button on the top panel of the TV or the button on the remote
control to turn the TV on. The red LED indicator will turn blue.
The first time you turn the TV on, it will go straight into First Time Installation.
Connect one end of the RF coaxial cable to the aerial socket on the wall and the
other end of the cable to the RF (75Ω) socket on the right rear side of your TV.
Install the batteries correctly by following the polarity (+ and -) indications
in the battery compartment.
Do not connect the TV to the mains supply until you have completed all
the connections.
1. Press and lift the back cover
up to open the battery
compartment of the remote
control.
2. Insert two AAA size batteries.
Close the battery
compartment cover.
Press the OK button on the remote control to start the First Time Installation.
Congratulations
on the purchase of your new Currys Essentials TV.
Your new TV incorporates the latest technology to enhance your viewing experience.
We would suggest that you allow about 20 mins for initial setup.
Please follow this guide for a successful first time installation.
To mains socket
OR
RF coaxial cable
(not included)
1
2
1. Lay the TV down on a flat surface with the back side facing up. Please make sure to
place a soft cushioned material (such as a pillow or thick piece of foam) beneath the
screen.
2. Slide in the base stand until the screw holes are aligned. Secure the base stand with
the 2 screws.
Screws x 2
(P.N. I.03.MP4010001)
Screw
Well done,
your new TV is now ready to use.
You will find that there are many exciting features available. To get to know all these
features, please take some time to read the instruction manual provided with your TV.
(P.N.: I.08.015167814)
LCD TV
Base Stand
Screws x 2
Remote Control /
AAA Batteries x 2
AV Cable
Instruction Manual
Quick Start Guide
Digital Switchover
Addendum
Video
Video
R
R
L
L
ON/OFF
