background image

Operator’s Manual

4-Cycle Gasoline Blower

HB425

SAVE THESE INSTRUCTIONS

For service call 

1-877-282-8684

in the United States, or

1-800-668-1238

in Canada to obtain a list of authorized service

dealers near you.  For more details about your unit, visit our website
at 

www.cubcadetcommercial.com

.

DO NOT RETURN THE UNIT TO THE RETAILER.  PROOF OF
PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE.

THIS PRODUCT IS COVERED BY ONE OR MORE U.S. PATENTS.
OTHER PATENTS PENDING. 
Service on this unit both within and after the warranty period should
be performed only by an authorized and approved service dealer. 
Before beginning, locate the unit’s model plate. It lists the model and
serial numbers of your unit. Refer to the sample plate below and copy
the information for future reference.

All information, illustrations, and specifications in this manual are
based on the latest product information available at the time of
printing. We reserve the right to make changes at any time without
notice.

Copyright© 2008 MTD SOUTHWEST INC, All Rights Reserved.

TABLE OF CONTENTS

Service Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Rules for Safe Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Know Your Unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Assembly Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Oil and Fuel Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Starting/Stopping Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Maintenance and Repair Instructions  . . . . . . . . . . . . . . . . . . . . . . .6
Cleaning and Storage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Troubleshooting Chart  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Parts List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E10–E11
Warranty Information  . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

P/N 769-03822

(06/08)

Copy the serial number here:

Copy the model and  parent part number here:

S/N :

ITEM :

MODEL :

In an effort to reduce the impact on the forests,
and reduce carbon and greenhouse gas
emissions, MTD is using less paper by reducing
the text size of this manual.

DO NOT RETURN

THIS PRODUCT

For Assistance please call 1-877-282-8684 (U.S.)

or 1-800-668-1238 (Canada)

or visit www.cubcadetcommercial.com

Summary of Contents for HB425





























Reviews: