INSTRUCTIONS
Assembling the OFFICE FootFidget®
1.
Remove screws from the “X” bracket. Insert each of the four “Arms” to the “X”
bracket. Line up the hole on the “X” bracket with the hole on the arm.
Holes aligned
2.
Insert screw into hole, initially threading the screw by hand and then tighten with the
Allen Wrench so that arms are on securely. *Do not over tighten*
3.
Turn the FootFidget® upside down. Place rectangular nonskid pads on the bottom of
each ‘arm’, closer to the bend to give the unit stability.
4. Turn stand upright.
5. Slide both elastic bands of the same color through the large foam tube to form the
FootFidget® Assembly. Bands should run parallel in the tube
* If both the yellow and black bands are used together, both sets of bands pass in
parallel through the tube, stacked black on top of yellow.
6. Attach the FootFidget® assembly to the stand.
Three height notches are available on
each arm to provide comfortable movement and correct ergonomic positioning either
sitting or standing
Band loops should be placed over the top of each arm and slid down
into the notches at the same level. (Refer to other side for further instructions). *If both
the yellow and black bands are used together, place the 4 yellow loops on the middle 4
notches, and then the 4 black loops on the top 4 notches.
7. Adjust the vinyl tubing covering the elastic bands so it extends equally from
both sides of the large foam tube.
PARTS LIST FOR THE FOOTFIDGET®
Nonskid pads
– 4 “X” Member - 1 Arms - 4
Allen Wrench - 1 Screws – 4
FootFidget® Assembly -2 yellow &
2 black bands, 1 foam covered tube
WARRANTY
:
Office FootFidget® is warranted against
manufacturer’s defects in parts and
materials for 90 days from the time of
purchase. Please contact the company for
a RMA (Return Merchandise
Authorization)
CSS - FootFidget, LLC
830 West Illinois Rte. 22, Suite 329
Lake Zurich, IL 60047
www.footfidget.com
WARNING:
The Office FootFidget® is to be used as a fidgeting mechanism
and/or a dynamic foot rest while sitting on a stool, standing at a work surface or
sitting on a couch or chair. The FootFidget® Foot Rest is NOT intended to
support a user’s full weight by standing or bouncing on it with both feet. The
FootFidget® is not warrantied against misuse or unintended use. The buyer takes
responsibility for occurrences from unsupervised use by a minor.
