CPR Aquatic, INC•P.O. Box 1111•3749 West End Road, Arcata, CA 95521
CPR Technical Support (707) 826-9636 • FAX (707) 826-9623
www.cprusa.com • [email protected]
NANO TANK
Until now it has been difficult to create a hassle-free nano reef tank that doesn’t require high amounts
of maintenance. The Nano Tank is a multipurpose tank that has been designed to make micro reefs easy
to keep and also allows those with larger systems to quarantine specimens before adding them to their
main tank. Using a removable, easy to clean biological filter, the Nano Tank quickly and efficiently
removes wastes from the tank. With its 13.5” x 11.25” footprint, the Nano Tank is small enough to fit on
a desk while providing adequate filtration to sustain its inhabitants.
To place your Nano Tank into operation:
1. Carefully remove all packing materials and the protective paper covering the sides of the Nano Tank .
It may be necessary to use warm water to remove the residue left by the paper.
2. Inspect all parts of the filter assembly. You should have:
(1) Tank body and lid
(1) return powerhead
(1) netting
(1) Bio Bale
TM
filter media
(1) Filter pad
If any parts are damaged or missing, please contact your dealer immediately.
3. Make sure that the return powerhead is attached to its outlet, which should be mounted inside the
filtration section of the Nano Tank . This may be detached during shipping.
4. Fill tank partially and place substrate (if any) on the bottom of the tank. Fill the tank up until water
begins to flow into the filter portion of the Nano Tank . Begin filling the filter portion of the tank by
adding water to the filter section in back of the tank. Fill this until the water level is about three
inches above the return pump.
5. Plug the powerhead in. The Nano Tank is now in operation.
