![background image](http://html.mh-extra.com/html/croydon/ti25/ti25_instruction-manual_2690829001.webp)
CROYDON
TI25-160001 W4
INSTRUCTION MANUAL
CROYDON
CROYDONMAQ INDUSTRIAL LTDA.
Estrada São Lourenço, 891 - Capivari - Duque de Caxias.
RJ - Brasil - CEP 25243-150 Fax: 55 21 2676-2522
Phone: 55 21 2776-1928 / 55 21 2676-1512
e-mail: [email protected]
INDUSTRIAL BLENDER - TI25-160001 W4
* Please read these instructions carefully before operation this appliance.
IMPORTANT SAFEGUARDS
- When using electrical appliances, basic safety precautions should always be observed
including the following:
- Before connecting your blender check if voltage of your power system corresponds to the
same specified on the appliance.
- To protect against risk of electrical shock, do not put cord, plug, base or motor in water or
other liquids.
- Never connect two or more appliances in the same plug.
- When not in use, unplug the blender.
- Avoid starting blender empty.
- Avoid contact with moving parts because blades are sharp. "Handle carefully".
- Keep hands and utensils out of container while blending to prevent the possibility of
severe personal injury and or damage to blender. A plastic spatula may be used but
must be used only when blender is "NOT RUNNING".
- Only remove the container when blender "COMPLETELY STOPPED".
INSTRUCTIONS FOR USE
- Blender control is made by switch ( ON - OFF).
- If blender action stops, turn blender off. Remove lid and use a plastic spatula to push
mixture toward blades. Replace lid and continue.
CLEANING PROCEDURE
- Clean container (cup) with liquid soap and water filling to half capacity.
- Turn on blender for some seconds.
- Turn off blender, empty the container and rinse it.
- Unplug blender clean body and external cup with a wet cloth.
- Do not use harsh detergent or chemical products for cleaning.
- Never use water jet or immerse appliance in water.
- Wipe off appliance with a dry cloth and wait at least half an hour before re-connecting to
the main power outlet.
- If it’s necessary to disassemble the knife and the bushing follow the instructions of the fig. 1.
- It's recommend to cut food in small pieces and maintain food below container's frieze
height avoid spilling.
- Place a small quantity os food with blender off. Turn on blender and add the rest of
food that you want to process.
- When blender is running do not remove the lid.
TI25
TI25
TI25
TI25