background image

CROYDON

FA28-200001 A8

CROYDON

ELECTRICAL FRYER  - MODEL: FA28-200001 A8

-Please read these instructions carefully before operating this appliance.
-The temperature is thermostatically controlled between the range of 80

°

C to 200

°

C(176

°

F to 392

°

F). A 

signal lamp adjacent  to the thermostat indicates when the heating element is energized.

SAFETY

-This appliance is designed to operate on alternative current (A.C.) Only
-DO NOT CONNECT TO DIRECT CURRENT (D.C.).
-Care should be taken when operating this appliance, as HOT SURFACES may cause burns.
-

WARNING!

 Hot oil can cause burns.   Spilling oil can cause severe burns.   Do not move fryer without       

draining all the oil from the tank.

-Do not over fill baskets.  Carefully load them into hot oil.  A danger of surge boiling can also occur if the 

food to be fried is excessively wet or the frying basket is too full.

-It is dangerous to use old oil as this can reduce the flash point  and cause surge boiling.
-Ensure that power supply cord does not come into contact with hot surfaces.
- When not in use for long period unplug the appliance.

INSTALLATION AND OPERATION

-Before connecting your appliance check if voltage of your power system corresponds to the unit 

label.

-Fill the container with 46.9 lbs (23 liters) of quality oil (fat).
-Prepare a solution with 2 liters of water and 300 g of salt, mixing until it becomes homogeneous.
-Add the solution in the container until it reaches the second mark.
- Wait about 10 minutes to solution get deposited in the bottom avoiding contact with the heating 

element.

-Set thermostat to desired operation temperature (table 1) and pilot light will turn on.  As soon pilot 

light turns off, appliance has reached desired temperature .

-The basket should be filled up to 2/3 of the capacity.
-To turn off your unit turn knob completely towards left.
-In a matter of assuring better quality in the fry and longer durability of the oil, the solution should be 

changed daily by doing what follows:

1- Open the tap (located in the inferior part of the container);
2- Drain the solution with all dust that comes within. Don’t drain the oil.
3- If necessary complete the oil level.
4- Add a new solution. 

CLEANING PROCEDURE

-Always ensure that the appliance is disconnected from the main power supply before cleaning.
-Wait until oil cools and proceed as follows:

- Remove  installation box.
- Remove  oil container and empty the oil and solution.

-Appliance should not be cleaned with a water jet or immersed in water. Use only a damp cloth or sponge 

dipped in soapy water.

-Wipe off appliance with a dry cloth and wait at least half an hour before re-connecting to   main power 

outlet.

WARNING!

- UNPLUG THE APPLIANCE AFTER USE.

OW

L

F

OF

HI

OW

L

F

OF

HI

T

h

p

ic

tu

re

s/

d

ra

w

in

g

ar

ill

u

st

ra

ti

o

n

s.

 A

ll 

d

at

ca

n

 b

ch

an

g

ed

 w

it

h

o

u

n

o

ti

fi

ca

ti

o

n

.

INSTRUCTION MANUAL

CROYDONMAQ INDUSTRIAL LTDA.

 

Estrada São Lourenço, 891 - Capivari 

 Duque de Caxias - RJ / Brasil - CEP 25243-150
 Phone:  55 21 2777- 8100  /  55 21 2777-8106
 e-mail: [email protected] 

Reviews: