![background image](http://html.mh-extra.com/html/croydex/danby-beauty-station-white/danby-beauty-station-white_manual_2690809001.webp)
1
Danby Beauty Station
Thank you for purchasing this Croydex product. Please follow the fixing and care instructions to ensure
your beauty station is fitted safely and retains its high quality finish.
Please retain this leaflet for future reference.
This installation guide applies to the following cabinets:
WC010422 - Danby Beauty Station White
WC010431 - Danby Beauty Station Grey
Tools required - not supplied
Pencil;Tape Measure; Philips Screwdriver; Flat Head Screwdriver; Drill; 8mm Drill Bit (Ceramic drill bit
optional).
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Home Safety Advice
- It is recommended that two people fit this product to ensure that it is fitted safely.
- Always take care when using power tools, particularly in the bathroom.
- Always check for hidden cables and pipework before drilling and take extreme care if there is any
water in the working area.
- It is advisable to use a residual current circuit breaker (RCCB).
- Always wear suitable eye protection when drilling.
- If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used.
- Always ensure that the drill hole passes through the central tiled area rather than through the grouted
area. To prevent damage to the tile, mask the area around the hole with tape before drilling.
- Do not strike the product with hard or sharp objects.
Product Care
To retain the best quality finish, clean product regularly with a soft damp cloth.
Do not use abrasive or chemical cleaners as these will damage the product.
Do not overload the cabinet. Maximum safe working load is 10kg evenly distributed if mounted on to a solid
wall. If mounted on to a cavity wall reduce the load to 5kg evenly distributed.
CAB 091 R01
A. Hang ‘N’ Lock Bracket x 1
C. Hang ‘N’ Lock Cam x 2
G. Wall Plugs x 2
E. Countersink Fixing Screws x 2
(Optional)
F. Fixing Screws x 2 (Optional)
D. Hang ‘N’ Lock Locking Stud x 2
B. Hang ‘N’ Lock Bracket x 1
4 screws are supplied within this fixing pack.
Only 2 x screws are required to install the Hang ‘N’ Lock bracket.
Please use either the countersink or dome head fixing screws supplied.