Included items:
1 sealer. 1 instruction manual.
INTENDED USE
Cristófoli Sealer was developed to seal packages (
paper/plastic
) proper for sterilization in steam autoclaves.
CRISTÓFOLI SEALER
INSTRUCTION MANUAL
01
Manual Seladora Cristófoli Nacional Inglês- Rev.2-2018
S
E
A
L
E
R
S
I N S T R U C T I O N
M A N U A L
HOW TO USE THE CRISTÓFOLI SEALER
1
2
3
4
Plug the sealer and press for three seconds to turn on the equipment, 3 beeps will sound and the LED will blink, indicating the
heating phase. When sealing temperature is reached (three minutes approximately with the handle lifted up, Fig. 1), 2 beeps will sound
and the LED will be on, indicating that the sealer is ready to be used.
Insert the tip of the sterilization package through the sealing entrance, always with
the paper side downwards and plastic upwards
,
pull by the other side and place the roll at the roll holder (Fig. 1). Pull the paper to seal at the desired size.
Never perform sealing with the plastic side downwards
in order avoid trouble with access of plastic material on the heater.
Pull the sealing handle until it locks, a beep will sound (Fig. 2), starting the sealing process (6 seconds). At the ending of this period, the
LED will be on and two beeps will sound continuously.
Note:
After 5 minutes with the handle down, the sealer will be automatically
turned off.
Before lifting up the sealing handle
, cut the package by sliding the blade holder from a side to another and taking it back to the initial
position (Fig. 3).
Lift up the handle (Fig. 4) and take the package.
After using, press for three seconds to turn it off.
Note:
After 30 minutes with no use, the equipment is automatically turned off.
RECOMMENDATIONS AND WARNINGS
NEVER PERFORM SEALING WITH THE PLASTIC SIDE DOWNWARDS, THIS SEALER MUST ONLY BE USED WITH
PAPER/PLASTIC PACKAGES.
Follow the instructions and guidelines from the sterilization packages manufacturer regarding use instructions, precautions, conservation
and storage.
This equipment works with high temperatures, because of that, avoid contact with hot parts, indicated by a label.
When packaging instruments, protect the pointy or sharp ones with cotton or gauze to avoid cuts or holes in the packages.
The amount of instruments must be compatible with the package to avoid ruptures. Cristófoli offers a variety of steam sterilization
packaging rolls of 100 meters, with 10, 15, 20, 25 and 30 cm width.
Cristófoli Sealer is able to work on 127V and 220V, as indicated in the identification label, behind the equipment (Fig. 1).
BOX CONTENT
5
COMPONENTS IDENTIFICATION
1 - On/Off button.
2 - Heating LED.
3 - Sealing complete LED.
4 - Sealing handle.
5 - Cutting blades holder.
6 - Power cord.
7 - Roll holder.
8 - Identification label (under the equipment).
Images for illustrative purposes only
.
6
Fig.4
Fig.2
Fig.3
Fig.1
2
3
4
1
5
6
7
8
