CRESTRON
ST-CBL
Programming Cable
Crestron Electronics, Inc.
101 Broadway, PO Box 394
Cresskill, NJ 07626
Tel: 888.CRESTRON / 201.894.0660
Fax: 201.894.1192 / BBS: 201.894.1317
http://www.crestron.com
Specifications subject to
change without notice.
Doc. 5680
03.97
DESCRIPTION:
The ST-CBL is CRESTRON's programming cable that enables communication between the Series ST-
1500 Touchpanel and the CRESNET II remote control system. The programming cable is six feet in length.
One end of the ST-CBL has a RA, 3.5 mm stereo connector that inserts into right side of the touchpanel
(when viewing the touchscreen). The other end of the ST-CBL has a four-position female connector that
inserts into the control system port labeled NET. Refer to the illustration below for proper connection.
NOTE
The ST-CBL only needs to be connected when loading a program.
NET
G
Y
Z
24
CNRACK OR
CNRACK-D
OR CNMS
SERIES ST-1500
TOUCHPANEL
ST-CBL
