DO
GUIDE
Connecting the DMPS3-4K-300-C
DO
Determine the Address of the Device
The DMPS3-4K-200-C and DMPS3-4K-300-C can be addressed using the hostname of the device. The default hostname is DMPS3-
xxxxxxxx
, where
xxxxxxxx
consists of the last eight characters (excluding punctuation) of the MAC address. For example, if the MAC address is 00:10:7F:08:09:AA:05, the
default host name is DMPS3-0809AA05. The MAC address is labeled on the rear panel of the device.
Alternatively, the DMPS3-4K-200-C and DMPS3-4K-300-C can be addressed using the IP address of the device. By default, DHCP is enabled. To set a
static IP address, use any of the following:
• The Crestron Toolbox™ application on a PC that connects to the device via the Ethernet network
NOTE:
The Device Discovery Tool can be used to find the current IP address.
• A USB connection to the COMPUTER port on the front panel of the device
• The front panel LCD display menu
DMPS3-4K-200-C/DMPS3-4K-300-C
3-Series
®
4K DigitalMedia™ Presentation Systems
DO
Install the Device
Mounting into a Rack
The DMPS3-4K-200-C and DMPS3-4K-300-C occupy 3U of rack space.
Using a #1 or #2 Phillips screwdriver, attach the two included rack ears
to the device using the six included #6-32 x 5/16" Phillips screws (three
screws on each side). Then, mount the device into the rack using four
mounting screws (not included).
Placing onto a Flat Surface
When placing the device onto a flat surface or stacking it with other
equipment, attach the included feet near the corners on the underside of
the device.
DO
Connect the Device
Connect the device as required for the application.
DO
Check the Box
QUANTITY
PRODUCT
COLOR
PART NUMBER
1
Cable, USB 2.0, A - B, 6’ (1.83 m)
2014966
2
Bracket, Rack Ear, 3U
2033588
3
Connector, 2-Pin
2012361
1
Connector, 3-Pin
2003575
4
Connector, 4-Pin
2003576
15
Connector, 5-Pin
2003577
2
Connector, 8-Pin
2003580
4
Foot, 0.5" x 0.5" x 0.23", Adhesive
Black
2002389
1
Power Cord, 6' 7" (2 m)
2001134
6
Screw, 6-32 x 5/16", Undercut Head, Phillips
Black
2007223
Mounting into a Rack
Connecting the DMPS3-4K-200-C
IR IN:
From
CNXRMIRD
IR receiver
IR - SERIAL OUT 1-4:
To IRP2 IR emitter probe
or one-way serial
controlled devices
RELAY 1-4:
Output to
controllable
devices
COM A and COM B:
To/from
RS-232 devices
NET:
To/from any
Cresnet
®
device
PoDM+
INPUT PWR:
From Crestron
PoDM+ power
supply*
Power from
line voltage
Ground
INPUT 1-4:
From sense output of
digital output devices
(24 volts maximum)
SERVICE:
For factory
use only
MC/LN 1-6:
From balanced
microphone/
line-level
audio sources
HDMI INPUTS 1-6:
From digital
video/audio sources
AUD IN 1-5:
From balanced/
unbalanced stereo
line-level analog
audio sources
DM INPUT:
From DM 8G+
®
output of a DM
®
transmitter or
other DM device
or from an
HDBaseT
®
device*
HDMI OUTPUT:
To HDMI
®
display
DM OUTPUT:
To DM 8G+
input of a DM
receiver or
other DM device
or to an
HDBaseT device*
CONTROL
SUBNET:
To Crestron
local
network
device*
PROG OUT:
Audio output to
amplifier or
amplified speakers
AUX OUT 1-2:
To video
teleconferencing
or codec input
SPEAKER OUTPUT:
To 4-ohm/8-ohm
stereo speakers or
70-volt/100-volt
mono speakers
LAN:
10BASE-T/
100BASE-TX/
1000BASE-T
Ethernet to
LAN
The DMPS3-4K-200-C and DMPS3-4K-300-C can be mounted into a rack or placed onto a flat surface.
IR IN:
From
CNXRMIRD
IR receiver
IR - SERIAL OUT 1-4:
To IRP2 IR emitter probe
or one-way serial
controlled devices
RELAY 1-4:
Output to
controllable
devices
COM A and COM B:
To/from
RS-232 devices
NET:
To/from any
Cresnet
®
device
PoDM+
INPUT PWR:
From Crestron
PoDM+ power
supply*
Power from
line voltage
Ground
INPUT 1-4:
From sense output of
digital output devices
(24 volts maximum)
SERVICE:
For factory
use only
MC/LN 1-6:
From balanced
microphone/
line-level
audio sources
HDMI INPUTS 1-6:
From digital
video/audio sources
AUD IN 1-5:
From balanced/
unbalanced stereo
line-level analog
audio sources
DM INPUTS:
From DM 8G+
output of a DM
transmitter or
other DM device
or from an
HDBaseT device*
HDMI OUTPUTS
1-2:
To HDMI
display
DM OUTPUTS:
To DM 8G+
input of a DM
receiver or
other DM device
or to an
HDBaseT device*
CONTROL
SUBNET:
To Crestron
local
network
device*
PROG OUT:
Audio output to
amplifier or
amplified speakers
AUX OUT 1-2:
To video
teleconferencing
or codec input
SPEAKER OUTPUT:
To 4-ohm/8-ohm
stereo speakers or
70-volt/100-volt
mono speakers
LAN:
10BASE-T/
100BASE-TX/
1000BASE-T
Ethernet to
LAN
