5925 Heisley Road • Mentor, OH 44060-1833
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
OPERATING and MAINTENANCE INSTRUCTIONS
for H135WUA11 Hot Cabinet (Aluminum)
H135WSUA11 Hot Cabinet (Stainless Steel)
Hot Cabinets
FL-2334
Rev. 2 (3/13)
Page 1 of 4
Model No.
Volts
Watts
Amps
Hertz
Phase
NEMA
H135WUA11
H135WSUA11
120
2000
16
60
1
5-20P
H135WUA11208
H135WSUA11208
208
2000
9.6
60
1
6-15P
H135WUA11240
H135WSUA11240
240
2000
8.6
60
1
6-15P
All are designed for AC service. The above model numbers may be followed by “
M
”, “
L
”, “
D
”, “
R
”
and ending with “
S
” or “
Z
”.
HOW TO INSTALL UNIT:
1. Place cabinet near warm ovens. Do NOT place
cabinet in drafty areas or near ventilating systems.
2. Plug end into proper wall outlet.
3. Fill with 2 qts.(1.8 liters) of clean, hot water.
HOW TO PROOF:
1. Fill water pan (See “How to Install”)
2. Push “POWER” switch to “ON.” The yellow light
will come on.
3. Push “MODE SELECTION” switch to “PROOF”.
The yellow light will come on.
4. Turn “HUMIDITY” dial to No. 8.
5. Turn “AIR” dial to “OFF.”
6. Preheat for 30 minutes. “
7. Put fresh or fully thawed dough into cabinet.
NOTE:
The cabinet temperature will drop tempera-
ture inside cabinet if cold dough is added.
Do NOT put frozen dough into cabinet
CONTROL PANEL PARTS IDENTIFICATION
1. Switch-Power
5. Yellow Light-Proof
2. Yellow Light-Power
6. Red Light-Heat
3. Thermostat-Humidity
7. Switch-Mode Selection
4. Thermostat-Air
8. Thermometer
NOTE:
No. 8 setting will give you an approximate
temperature of 95°F (35°C), and 90-95%
humidity. Experiment with different “HU-
MIDITY” and “AIR” settings to get the exact
temperature and humidity you need. The
thermometer shows the temperature inside
the cabinet.
NOTE:
Check water level in water pan if you are
proofing longer than 90 minutes. Fill with
clean, hot water.
CAUTION
Use of treated or soft
water may be required
for proper operation and to maintain warranty.
