background image

40 V Max* Lithium Hedge Trimmer 

Model: CMCHT98022

• SAFETY
• OPERATION
• MAINTENANCE
• TROUBLESHOOTING
•  ESPAÑOL PG. 12

*Maximum initial battery pack voltage (measured without a workload) is 40 volts. Measured under a workload, nominal voltage is 36.
*El máximo voltaje inicial del paquete de baterías (medido sin una carga de trabajo) es 40 voltios. Si se mide con una carga de trabajo, el voltaje nominal es 36.

Thank you for choosing CRAFTSMAN! 

PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.

If you have a question or experience a problem with your CRAFTSMAN purchase, go to  

www.craftsman.com  

If you can’t find the answer or do not have access to the Internet, call 888-331-4569 from 8 a.m. 

to 5 p.m. EST Mon. - Fri. to speak with an agent.  Please have the catalog number available 

when you call.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

VEA EL ESPANOL EN LA CONTRAPORTADA. INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. 

ADVERTENCIA: 

LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

To register your new product, visit 

www.craftsman.com/registration

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

Summary of Contents for CMCHT98022

























Reviews: