This quick installation guide was designed to help with the basic configuration for
the Phoenix ATX. More detailed information can be found in the installation guide.
Connector
Description
J1
VGA DB15 (ATX-G only)
J2
SER A
J3
Ethernet 1 (Optional 10/100/1000) RJ45
J4
(Bottom)Keyboard – PS/2 (Top)Mouse – PS/2
J5
Audio – Mic. In (pink), Line Out/Headphone (green) and Line In (blue)
J6
LPT - Parallel
J7
(Bottom) USB (Ports 2 & 3) - (Top) Ethernet 2 (Optional)
J8
SER B
J9
Keyboard/Mouse Header
J11
Audio - Aux. In Header
J12
Rear Chassis Fan
J13
Audio – CD In Header
J14
ATX Power Aux. Connector
J15
PCI Connector 5
J16
PCI Connector 4
J17
PCI Connector 3
J18
PCI Connector 2
J19
PCI Connector 1
J20
ISA Slot 1
J21
ISA Slot 2
J22
CPU Socket
J23
AGP Slot/ADD Connector (ADD capabilities on ATX-G only)
J25
DVO Connector (ATX-G Only)
J26
CPU Fan
J28
Intruder detection Header
J29
JTAG
J30
DDR DIMM Socket 0
J31
DDR DIMM Socket 1
J32
USB Header (Ports 4 & 5)
J34
Alt. Secondary IDE
J35
Secondary IDE
J36
ATX Power Connector
J37
Front Panel Header
J38
USB Header (Ports 0 & 1)
J39
Keylock Header
J40
GPIO Header
J41
Floppy Disk Drive Connector
J42
Primary IDE
Pin#
Front Panel Header – J37
1
HDD LED Anode
2
Power LED Green Blink
3
HDD LED Cathode
4
Power LED Yellow Blink
5
Reset - GND
6
Power Switch
7
Reset
8
Power Switch - GND
9
+5V
10
NC
11
Infra Red Rx (Opt.)
12
GND
13
GND
14
Power LED Cathode - GND
15
Infra Red Tx (Opt.)
16
Power LED Anode
