CSE-ATV — opErATing mAnuAl And pArTS liST
rev. 07/27/07
modEl #CSE-ATV
1500 Lb. CapaCity
atV LiFt
parts breakdown and operating manuaL
This operaTing manual conTains
imporTanT safeTy informaTion.
read carefully and undersTand all
informaTion before operaTing Tool.
save This manual for fuTure use.
ownEr/uSEr rESponSibiliTy:
the owner and/or user must have a thorough understanding of
the manufacturer’s operating instructions and warnings before
using the lift. personnel involved in the use and operation of
equipment shall be careful, competent, trained, and qualified
in the safe operation of the equipment and its proper use
when servicing motor vehicles and their components. warning
information should be emphasized and understood. if the
operator is not fluent in english, the manufacturer’s instructions
and warnings shall be read to and discussed with the operator in
the operator’s native language by the purchaser/owner, making
sure that the operator comprehends its contents.
owner and/or user must study and maintain for future reference
the manufacturer’s instructions and pertinent warning information.
owner and/or user is responsible for keeping all warning labels
and instruction manuals legible and intact. replacement labels
and literature are available from the manufacturer.
mAinTEnAnCE And inSpECTion:
Visual inspection should be made before each use of the lift,
checking for leaking hydraulic fluid and damaged, loose or
missing parts. each lift must be inspected by a manufacturer’s
repair facility immediately, if accidentally subjected to an
abnormal load or shock. any lift which appears to be damaged in
any way, found to be badly worn, or operates abnormally must
be remoVed From serViCe until necessary repairs are made
by a manufacturer’s authorized repair facility. it is recommended
that an annual inspection of the lift be made by a manufacturer’s
authorized repair facility and that any defective parts, decals or
warning labels be replaced with manufacturer’s specified parts.
a list of authorized repair facilities is available from
the manufacturer.
do noT EXCEEd loAd rATing of 500 lbS.
SECurE loAd To TiE-down loopS.
uSE only on HArd lEVEl SurfACES CApAblE of
SupporTing THE loAd. uSE on oTHEr THAn HArd, lEVEl
SurfACES mAy rESulT in poSSiblE loSS of loAd.
no AlTErATionS To THE ATV/moTorCyClE lifT SHAll
bE mAdE.
READ, STUDY AND UNDERSTAND THE OPERATING ANUAL
PACKED WITH THIS LIFT BEFORE OPERATING JACK AND/OR
LIFT. FAILURE TO HEED THESE WARNINGS MAY RESULT IN LOSS
OF LOAD, DAMAGE TO THE LIFT, AND/OR FAILURE RESULTING
IN PROPERTY DAMAGE, PERSONAL OR FATAL INJURY.
prior To opErATion:
1. press release pedal.
2. pump foot pedal 6 full strokes to purge the air from the
pump and valving.
3. remove foot from release pedal.
4. pump the foot pedal until the jack has reached full extension.
Continue to pump several times to purge air from under the
ram.
5. press release pedal and push ram into its lowest position.
take foot off release pedal and operate normally.
note:
if the jack responds immediately to pump action, it is free
of air and ready for operation. if not, repeat procedure.
SpECifiCATionS:
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 Lbs. maximum
minimum Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3/4"
maximum Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-1/2"
base size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17" x 36-1/4"
shipping weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101.4 Lbs.
