Wide Dynamic High Resolution Color Camera
ITEM NO.: CC45WD
Menu and Operation
Press the “menu” button, then press “enter” for menu control options
Under main menu mode, select
“
↑
” or
“
↓
”.for sub-menu options.
Select
“
←
” or
“
→
” for submenu mode selection.
The blinking cursor will indicate that this category has been selected.
In the submenu, press “EXIT MENU” to return to the main menu.
＊
Quick Wide Dynamic Camera Setup
＊
1. Under the OSD (On Screen Display), Select Lens
。
＊
2. Adjust Brightness
【
50
】
(00 to 100)
＊
3. Set Wide Dynamic Range
(WDR)
＊
4. Set WDR LEVEL
（
LOW/MIDDLE/HIGH
）
OSD
Manual
SPECIFICATION:
MODE NO.
CC45WD
TV SYSTEM
NTSC
PAL
IMAGE SENSOR
COLOR
1/3-inch CCD Sensor
CCD TOTAL PIXELS
811(H) X 508(V)
795(H) X 596(V)
SCANNING SYSTEM
525 lines, 60 fields/sec
625 lines, 50 fields/sec
SYNC SYSTEM
Internal / Line-Lock
MINIMUM
ILLUMINATION
Legacy mode
0. 05 Lux ( F1.2 , 5600ºK )
Star light Mode
0.0008 Lux ( F 1.2 , 5600ºK )
LENS
CS-mount
RESOLUTION
600 TVL
WHITE BALANCE
PUSH/MANUAL/ATW/COL-ROLL
GAIN CONTROL
SELECTABLE BY OSD MANUAL
S / N RATIO
52dB ( MIN) / 60dB ( TYP ) (AGC OFF)
AUTO IRIS
A.E.S. / DC
OSD DISPLAY
ON SCREEN DISPLAY FOR ALL CONTROL
WIDE DYNAMIC
52dB ( MAX) (Required DC-IRIS lens)
VIDEO OUTPUT
Composite output 1.0V p-p at 75 ohm
GAMMA CORRECTION
0.45 / 1.0 (SELECTABLE BY OSD MANUAL)
OPERATION TEMPERATURE
-20 º C TO 50 º C
OPERATIONAL HUMIDITY
within 85 % RH
POWER SUPPLY
Dual Power: AC 24V / DC12V 350mA
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
IRIS JACK
DC-LENS
P1 DUMP-
P2 DUMP+
P3 DRIVE+
P4 DRIVE-
CAM NAME OFF
LENS DC IRIS
EXPOSURE
DAY/NIGHT AUTO
WDR/BLC/ECLPS WDR
WHITE BAL ATW
3D-DNR ON
EFFECTS
SPECIAL
EXIT
RET
1
2
3
4
