![background image](http://html.mh-extra.com/html/coopers/st07637i/st07637i_user-manual_2665174001.webp)
AA
AA
AA
AA
Before
each
use
After
each
use
Hearing Aid
Charging Case
Hearing Aid
AC Adapter
Ear Cap (two types – L,M,S and Mini)
AA Alkaline Battery
Cleaning Brush
THE CONTENT OF COMPONENT
DIAGRAM
Charging Case
Rechargeable Battery
Built-in Compartment
Hearing Aid
AA Alkaline
Battery
Cleaning Brush
Ear Cap
Status Button
DC Jack for Adapter
Charging Status
Indicator Lamp
Battery / AC Adapter
Power Indicator Lamp
Battery / AC Adapter
Power Indicator Lamp
Charging Status
Indicator Lamp
Microphone
Volume Switch
Power Switch
OFF/ ON / NF(noise-free)
Ear Cap
SETTING METHOD OF HEARING AID
OFF: The power off
ON : Its 10-second delay on function will perfectly avoid having
feedback noise while wearing it.
NF (Noise-Free) : Low frequency background noise excluded
By state of the noisy environment, please set
this function to hear in comfort.
Battery /
AC Power
Indicator
Charging normally.
The charge is completed.
Place Hearing aid in charging case
improperly
Input power is sufficient.
Input power is low.
Insert new AA battery or use the
AC adapter.
Green light lit
Not Lit
Green light lit
Red light lit
Not Lit
Charging
Status
Indicator
The occasion of using Battery
to recharge
1. Install one attached battery in
the compartment.
2. Please observe whether the
illuminant of the lamp is
“GREEN” after you push on the
status button.
3. Please charge it for 7 hours at least.
The occasion of using AC Adapter to recharge
1. Insert the AC Adapter.
2. Please observe whether
the illuminant of the
lamp is “GREEN” after
you push on the status
button.
3. Please charge it for
5 hours at least.
CHARGE STATUS
CHARGING
OPERATING INSTRUCTION
※
Notice: Its 10-second delay on function will perfectly avoid having
feedback noise while wearing it.
3. Turn on the power or switch
to ”NF”. If there is feedback
noise please change to lager
ear cap.
1. Wear Hearing Aid on ear
properly.
2. Insert ear cap into ear canal
tightly to avoid feedback noise.
4. Rotate the volume switch to
the desired volume level.
1. Please clean your ear by using
cotton swabs before you wear
the hearing aid. If the hollow of
sound is clogged by your earwax,
the quality of volume will be inferior.
2. Please clean out the earwax adhered on the hearing aid.
The easiest location on which earwax to be stuffed is around
the hollow of sound.
MAINTENANCE METHOD