Horns - Up to 108dB(A), Hazardous Location, Weatherproof
DB3 Range
ATEX
Architects and Engineers Specifications
This range of light weight all GRP, explosionprrof horns is intended
for use in potentially explosive atmospheres and has been
designed with high ingress protection to cope with the harsh
environmental conditions found offshore and onshore in the oil,
gas and petrochemical industries.
The flamepaths, flare and the body, are manufactured completely
from a UV stable glass reinforced polyester. Stainless steel
screws and sinter are incorporated thus ensuring a corrosion free
product. A tapered flamepath is used to overcome the problems
of assembly of parallel spigot flamepaths.
An optional Exe terminal chamber is available.
★
UL Listed for USA and Canada
– Hazardous locations:
Class I, Div 2, Groups A, B, C & D
Class II, Div 2, Groups F & G
Class I, Zones 1 & 2, AExd IIC T4
– Ordinary locations: Audible-Signal Device
★
ATEX approved
★
NEMA 4x &6, IP66 and IP67
★
Certified temperature
–67°F to +158°F (–25°C to +70°C)
★
All GRP corrosion free flamepaths
★
Up to 108dBA output at 10 feet
★
Integral volume control
★
27 tones, user selectable
★
Two tones may be switched via the external voltage
supply
★
Horn/Strobe Combination Unit available
*Depends on version
Description:
Sounder/Strobe
Combination Unit
Horns for hazardous locations and harsh environments shall be UL and cUL listed for Class I, Division 2, Groups A,B,C&D, and
Class I, Zones 1&2, AExd IIC T4 applications and shall be listed under UL Standard 1638 for Indoor/Outdoor use. They shall be
constructed of lightweight, UV stable glass reinforced polyester, shall be corrosion resistant, and shall meet NEMA 4x, NEMA 6, IP
66 & IP 67 environmental requirements over a temperature range of -67°F to +158°F (-55°C to +70°C).
The horns shall have 27 user selectable output tones. Multiple horns shall be able to operate in synchronization. Rated current
draw at 24 vdc shall not exceed 380 mA for rated sound output of 105 dBA at 10 feet. The horns shall include an integral volume
control and a stainless steel mounting bracket with ratchet facility to direct sound output.
Features*:
Note: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance
with Cooper Wheelock standard terms and conditions.
