![background image](http://html1.mh-extra.com/html/cooper-lighting/mcgraw-edison-clm-square/mcgraw-edison-clm-square_specification-sheet_2663176001.webp)
AREA / ROADW
A
Y
1160
COOPER LIGHTING
MCGRAW-EDISON
®
• Formed aluminum
housing has interior-
welded seams for
structural integrity and is
finished in premium TGIC
polyester powder coat.
U.L. listed and CSA
certified for wet locations
and IP55 rated
• Ballast tray is securely
mounted and inter-locked
to housing interior for
cooler operation and
readily removable for
ease of maintenance
and replacement
• Standard rotatable and
interchangeable optics
allow for an easy field
retrofit with respective sag
and flat glass doors for
areas with restrictive
lighting ordinances
• Formed aluminum door
has heavy-duty hinges,
captive retaining screws
and is finished in
premium TGIC polyester
powder coat
• Convex tempered glass
lens or flat glass
• Standard one-piece
extruded EPDM gasket
• Approximate net weight:
79 lbs. (36 kgs.)
CLM
SQUARE
2 5 0 - 1 0 0 0 W
M e t a l H a l i d e
P u l s e S t a r t M e t a l H a l i d e
H i g h P r e s s u r e S o d i u m
A R C H I T E C T U R A L
A R E A L U M I N A I R E
NOTES: 1
Arm not included. See Accessories.
2
All lamps are mogul-base.
3
Pulse Start Metal Halide only.
4
750W Pulse Start for vertical mount only.
5
Requires reduced
envelope BT-37 lamp on Metal Halide or ED-37 on HPS.
6
Only available in 250-400W Pulse Start Metal Halide and vertical optics. Must specify E1 or E2 voltage.
7
Provides 0-10V DC low voltage, leads used in dimming control.
8
Product also available in non-US voltages and 50Hz for international markets. Consult factory
for availability and ordering information.
9
Multi-Tap ballast is 120/208/240/277V wired 277V. Triple-Tap ballast is 120/277/347V wired 347V.
10
250W only.
11
Maximum wattage on segmented optical distributions is 400W. 400W Metal Halide lamp must use reduced envelope ED-28 lamp.
12
Must use reduced
envelope ED-28 lamp when using 400W Metal Halide.
13
RW optic not available with flat glass.
14
Other finish colors available, including a full line of RAL color
matches. Consult your Cooper Lighting Representative.
15
Add as suffix in the order shown.
16
House side shield available on 2F, 3F, FT, 2S, 3S, 4S distributions
only, and all vertically lamped distributions when combined with sag glass.
17
400W Maximum.
18
Order separately, replace XX with color suffix.
19
Compatible
with sag lens vertical optics only.
20
Specifications and dimensions subject to change without notice.
D I M E N S I O N S
D E S C R I P T I O N
McGraw-Edison’s CLM combines
classic form and versatility making
it an excellent choice for
architects, specifiers and
contractors in today’s
energy- and design-conscious
environment. The CLM is offered
in a variety of mounting options,
optical distributions and lamp
wattages to provide maximum
flexibility in application.
Options
15
F
=Single Fuse (120, 277 or 347V)
FF
=Double Fuse(208, 240 or 480V)
EM
=Quartz Restrike with Delay (Also Strikes at Cold Start)
Q
=Quartz Restrike (Hot Restrike Only)
R
=NEMA Twistlock Photocontrol Receptacle
HS
=House Side Shield
16
EHS
=External Adjustable House Side Shield
VS
=Vandal Shield
17
L
=Lamp Included
Accessories
18
MA1061
=House Side Shield for CLM (Field Installed)
19
OA/RA1016
=NEMA Twistlock Photocontrol–Multi-Tap
OA/RA1027
=NEMA Twistlock Photocontrol–480V
OA1201
=NEMA Twistlock Photocontrol–347V
MA1004XX
=14" Arm for Square Pole. 1.0 EPA
MA1005XX
=6" Arm for Square Pole. 0.5 EPA
MA1006XX
=Direct Mount Kit for Square Pole
MA1007XX
=14" Arm for Round Pole. 1.0 EPA
MA1008XX
=6" Arm for Round Pole. 0.5 EPA
MA1009XX
=Direct Mount Kit for Round Pole
MA1029XX
=Wall Mount Bracket with 10" Arm
MA1010XX
=Single-Arm Tenon Adapter for 3 1/2" O.D. Tenon
MA1011XX
=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
MA1012XX
=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1013XX
=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1014XX
=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1015XX
=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1016XX
=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1017XX
=Single-Arm Tenon Adapter for 2 3/8" O.D. Tenon
MA1018XX
=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
MA1019XX
=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1045XX
=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1048XX
=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1049XX
=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
6" or 14"
[152mm or 356mm]
22" [559mm]
1/2" [89mm]
14" [356mm]
19 1/4" [489mm]
O R D E R I N G I N F O R M A T I O N
S A M P L E N U M B E R :
C L M - A M - 4 0 0 - M H - M T- 3 V- S G - B K - L
Product
Family
CLM
=CLM
Square
Mounting
Method
AM
=Arm Mount
1
AIR
=11 1/2" Arm
Included for
Round Pole
AIS
=11 1/2" Arm
Included for
Square Pole
Lamp
Wattage
2
250
=250W
320
=320W
3
350
=350W
3
400
=400W
450
=450W
3
750
=750W
4
1000
=1000W
5
Lamp Type
MH
=Metal Halide
MP
=Pulse Start
Metal Halide
(CWA)
HPS
=High
Pressure
Sodium
MPE
=ECON
TM
Electronic
Powered
Pulse Start
Metal Halide
6
MPD
=ECON
TM
Dimmable
Electronic
Powered
Pulse Start
Metal Halide
6, 7
Voltage
8
120
=120V
208
=208V
240
=240V
277
=277V
480
=480V
MT
=Multi-Tap
9
TT
=Triple-Tap
9
E1
=Electronic
120-277V
10
E2
=Electronic
200-277V
Distribution
Horizontal
1F
=Type I Formed
2F
=Type II Formed
2S
=Type II Segmented
11
3F
=Type III Formed
3S
=Type III Segmented
11
4S
=Type IV Segmented
11
5S
=Type V Segmented
11
FT
=Forward Throw
SL
=Spill Light Eliminator
12
CA
=Cutoff Asymmetric with EHS
Vertical
AR
=Area Round
AS
=Area Square
3V
=Type III Vertical
RW
=Rectangular Wide
13
Options &
Accessories
(See Below)
Lens Type
FG
=Flat Glass
SG
=Sag Glass
Colors
14
(add as suffix/
must specify)
AP
=Grey
BK
=Black
BZ
=Bronze
WH
=White
DP
=Dark Platinum
GM
=Graphite Metallic
E.P.A.
2.6 (without) 3.1 (with arm)
In all flat glass configurations.
P o w e r e d b y
t e c h n o l o g y