Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
11/16/2007 11:28:04 AM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADI070185
DESCRIPTION
Recessed downlight luminaire with 2 inch square regressed pinhole
aperture utilizing a low voltage MR16 tungsten-halogen lamp. Modular
platform can be reconfigured from below the ceiling to accept a broad range
of lamp modules and optical elements. Platform is suitable for direct contact
with insulation and 2x8 residential construction. Pl
element combination supports various lamp beam spreads for desired
optical distribution with excellent light control and low aperture brightness.
Frame
Galvanized steel plaster frame with
integral bar hanger receivers.
Setscrews provide positive
horizontal locking.
Collar
Matte black steel collar adjusts
vertically for 1/2" - 1" thick ceilings
and can be r/- 7.5° thru the
aperture. Integral gun sights
facilitate the use of guide strings or
laser lines. Shipped with a paint
overspray protector installed in the
collar.
Lamp Module
Installed or removed thru the
aperture or from the top and
allows lamp orientation at 0°, 90°,
180° and 270° positions.
Housing
Double wall aluminum housing
painted matte black for a visually
dark interior. All fasteners are
captive.
Gaskets
Closed cell gaskets achieve
restrictive airflow requirements
without additional caulking.
Bar Hangers
Captive preinstalled bar hangers
adjusts from 8-1/2" to 24" wide;
pass thru feature allows shortening
without removal. Captive nail
penetrates standard and
engineered lumber. Mounting
flange levels platform with ceiling.
Integral clip attaches directly to
t-bar.
Splay
Diecast aluminum splay has
truncated paramid with regressed
square aperture providing minimal
ceiling presence. Can be painted to
match ceiling finish. Mousetrap
type springs pull flange tight to
ceiling. Light trap eliminates spill
light at edge of flange. May also be
installed rimless using optional
plastering lathing ring. Provided
with both straight and angle cut
parabolic shielding cone, shipped
with angle cut version installed.
Junction Box
(7) 1/2" trade size pry outs, (3)
integral clamps for non-metallic
cable. Rated for (4) #12 thru branch
circuits. Wago® type push wire
connectors for field connections
Thermal Protector
Self-resetting thermal protector
protects against improper lamping.
Transformer
Integral dual output toroidal
magnetic transformer, 120V
50/60Hz input, 12V nominal 75VA
maximum output. Separate output
for circuits controlled by dimmers
compensates for losses in
dimmers, improves color
temperature and lumen output.
Lamp Capsule
Ceramic GX5.3 lamp holder
mounts to an aluminum heat sink
to dissipate heat. Connects to the
transformer with electrical quick
connects. Accepts 2 lenses, filters
or optional lamp snoot.
Code Compliance
Thermally protected, IP labeled,
cULus listed for damp locations
and ASTM-E283 AIRTITE(tm).
Suitable for direct contact with
insulation.
P408ICAT
MV4MR
E4RPIN
50W MR16
Tungsten-Halogen
2 Inch Square Dowlight
2“
(51mm)
5-3/4“
(146mm)
ENERGY DATA
Lamp Wattage
Input Power
Input Current
(Nominal)
(Watts)
(Amps)
20
21
0.17
35
37
.031
37
39
0.32
42
44
0.37
50
53
0.44
14-9/16”
(369mm)
8-1/2”
(216mm)
4-9/16”
(115mm)
4-5/16”
(126mm)
Cutout=5-3/16”
(132mm)
O R D E R I N G I N F O R M AT I O N :
C o m p l e t e u n i t c o n s i s t s o f p l a t f o r m , l a m p m o d u l e a n d o p t i c a l e l e m e n t .
P408ICAT = 4” Square
Aperture IC Housing
MV4MR = MR16
Vertical Lamp
Module, 120V Input
E4RPIN = 2” Square
Aperture Regressed
Pinhole
Optical Element
Platform
Lamp Module
Flange
P408ICAT MV4MR
Accessories
Blank] = Self Flanged,
Matte White Flange
RL = Rimless, Matte
White Flange
PLR4x4 = Plaster Lathing Ring
(For Use With E4PINRL Only)
RLA4x4 = Rimless Adapter
(For Use With E4PINRL Only)
LSA16 = Matte black lamp snoot accessory
L Series - Filter Media For MR16 lamps
(See Accessories specification sheet)
IRIS
®
