![background image](http://html.mh-extra.com/html/coolmax/v-400/v-400_product-manual_2661242001.webp)
Model: V-400
1. Function Description
This power supply is designed for personal computer. There are six DC outputs:
+5V, -5V, +12V, -12V, +12V2, +3.3V
&
+5V
SB
, and it provides power to all computer
systems and peripherals with maximum protection.
Here are some of the key features:
S-ATA ready
All kinds of protection circuits (OVP/OPP/SCP)
Fully supports all Intel & AMD system demands
20-24Pin/4-8Pin connectors available to support both 20Pin and
24Pin socket motherboards
Tube- tide design to tidy wires
Anti-corrosive nickel plated chassis
2. How to Setup
It is rather simple to install this power supply to your precious computer tower.
Follow the steps below to finish the setup.
Step1:Open the computer tower cover; put the power supply into the
corresponding location of the tower, and then use right screws to fix the
power supply to tower.
Step2:Put the Main Power Connector, ATX12V Connector, S-ATA Connector,
Peripheral Connectors and Floppy Connectors to the corresponding male
connectors of main-board, peripheral devices (i.e. HDD, CDROM etc.)
and floppy drivers respectively. When you connect the connectors, please
pay attention to the orientation of them because of the different hole sizes.
Find the proper orientation and push down firmly making sure that the
pins are aligned.
3. Specifications
3.1 Input Requirements
The power supply shall operate as below:
1