ASSEMBLY INSTRUCTIONS
(2) Side Piece
Top Piece
Bottom Piece
(2) Back Piece
(2) Skirt
(32) Hex Screws
Allen Wrench
Parts:
Center Shelf Piece
Top Shelf Piece
Center Divider - 5/8” Thick
Short Divider
(2) Long Divider - 3/8” Thick
(8) Double Hooks
(16) Small Screws
Tools Needed:
Phillips Head Screw Driver
(Not Included)
Step 3:
Insert edge of
Bottom
Piece
into mortise of
Side
Piece
.
Make
sure
back
grooves are aligned. Insert hex
screws into each of pre-drilled
holes in
Side Piece
and each
of the
Skirt
. Tighten down
halfway.
Step 2:
Align
Skirt
with pre-drilled
holes on
Bottom Piece
. Insert hex
screws into pre-drilled holes in
Bottom
Piece
. Tighten down. Repeat for re-
maining
Skirt Piece
.
Step 1:
Attach hooks to
Side
Pieces
, both sides of the
Center Divider
and both
sides of the
Long Dividers
by using phillips head screw-
driver to screw small screws
into pre-drilled holes before
assembling unit. Make sure
hooks are pointed upwards
toward the top of the panels
as seen in illustration.
Step 4:
Insert edge of
Center
Shelf
into mortise of
Side
Piece
. Insert hex screws into
each of pre-drilled holes in
Side Piece
. Tighten down
halfway. Repeat for
Top Shelf
Piece
. Note:
Top Shelf
does
not receive hex screws.
Step 5:
Insert edge of
Center
Divider
into mortise of
Side
Piece, Top Shelf,
and
Center
Shelf
.
Make
sure
back
grooves are aligned.Insert hex
screws into each of pre-drilled
holes in
Bottom Piece
.
Tighten down halfway.
Step 6:
Insert edge of
Long Divider
into mortise
of
Side Piece, Top Shelf,
and
Center Shelf
. Insert
hex screws into each of
pre-drilled holes in
Bottom
Piece
.
Tighten
down
halfway.
Notice - KEEP BACK GROOVES ALIGNED - Do Not Drill!
