CommScope SYSTIMAX imVision imPower, Instruction Sheet

Page: 1 / 5

860610260
Issue 2, April 2016
www.commscope.com
®
SYSTIMAX
®
imVision
®
imPower
™
Power Extender
Installation
© 2016 CommScope, Inc.
All rights reserved
This product is covered by one or more U.S.
patents or their foreign equivalents. For patents, see
www.commscope.com/ProductPatent/ProductPatent.aspx
Page 1 of 5
For RoHS Inquiries:
CommScope Inc.
Corke Abbey, Bray
Co. Dublin, Ireland
Attn: Legal Department
General
The SYSTIMAX
®
imVision
®
imPower
™ power extender can accommodate additional 96-fiber LC or MPO
modules to communicate with an imVision
®
controller. The imVision imPower supports redundant power for
iPatch
®
panels, with the ability to feed additional power to the imVision controller. A ribbonized cable is used
to connect the imPower to the panel bus to enable twice as many 96-fiber LC or MPO modules to
communicate with the imVision controller.
Ordering Information is listed below:
Material ID Part No. Description
760219345 imV-imP
imVision imPower power extender
760224832 imV-imP-AR
imVision imPower power extender (Argentina version)
imPower
™
Power Extender with imVision
®
Controller
How to Contact Us

To find out more about CommScope
®
products, visit us on the web at http://www.commscope.com/

For technical assistance:
-
Within the United States, contact your local account representative or technical support at 1-800-344-0223.
Outside the United States, contact your local account representative or
PartnerPRO
™
Network Partner.
-
Within the United States, report any missing/damaged parts or any other issues to CommScope Customer Claims
at 1-866-539-2795 or email to claims@commscope.com. Outside the United States, contact your local account
representative or
PartnerPRO Network Partner.
PA N
EL B U
S
D ispla
y
P WR 2
PW R
1
O U T
B