Command access VLP-M-KIT Installation Instructions Download

Page: 1 / 5

I N S T A L L AT I O N I N S T R U C T I O N S

VLP-M-KIT

The Command Access VLP-M-KIT is a field-installable motorized latch-pullback baserail kit for the Von

Duprin 33/35 & 98/99 series devices.

Visit our website for more details

www.CommandAccess.com

U.S. Customer Support

1-888-622-2377

Canada Customer Support

1-855-823-3002

Kit Includes

1 - VLP-M-KIT Baserail Kit

1 - 6’ Lead

1 - Dogging Hole Cap

Tools Required

• Cordless Drill

• 5/16 Nut driver (recommended) or Flat head

screwdriver

• #2 Phillips head screwdriver

02/16 Doc # 20272_E

Summary of Contents for VLP-M-KIT

Page 1: ...99 series devices Visit our website for more details www CommandAccess com U S Customer Support 1 888 622 2377 Canada Customer Support 1 855 823 3002 Kit Includes 1 VLP M KIT Baserail Kit 1 6 Lead 1 Dogging Hole Cap B A C Tools Required Cordless Drill 5 16 Nut driver recommended or Flat head screwdriver 2 Phillips head screwdriver 02 16Doc 20272_E A B C Additional Information ...

Page 3: ...baserail with 5 16 nut driver or flat head screw driver Remove push pad by pulling pad guides up then moving push pad forward then upward Remove mounting bracket Remove case for device 1 4 2 3 Detach the head assembly form the base rail by removing both screws on the backside of the baserail Screws ...

Page 4: ...e the C clip and pin attaching the latch to the baserail Swap your mechanical baserail for the electrified baserail Re install the pin into the first hole Re install C clip attaching the latch to the new baserail Re install both screws attaching the new baserail back to head assembly Screws ...