Jan 2022 Ver 200/ 201
365
Comfort
D y n a m i c A i r f l o w C o n t r o l
CAUTIONS
Use cautions when mounting components to surfaces
that may have concealed wiring beneath the surface.
Turn off power to HVAC equipment before installing or
servicing airflow controls.
Read and follow all instructions carefully.
Follow all local electrical codes during installation. All
wiring must conform to local and national electrical
codes.
Read entire manual before installing products.
Installation should be performed by a qualified
individual with sufficient experience and skill.
!
The WLDCK Kit includes:
Wireless Direct Damper Control
Installation Manual
Model WLDCK
Patent US 10,520,212 B1
WLDC Wireless Damper Control.
DDC2 Damper Control Module.
The WLDC is prelinked to the DDC2 and automatically
links when powered.
Connect the DDC2 Damper Control to R and C terminals at the
equipment using 2 conductor, 18 or 20 ga. thermostat cable.
Step 2. Wire the DDC2 to the Equipment
The DDC2 Damper Control is installed near the HVAC
equipment on a non-metal surface using the hardware kit.
Step 1. Install the DDC2 Damper Control
To remove the cover, press the
plastic tabs in the area indicated.
HVAC
System
DDC2
Damper Control
R
C
R
C
(1) CR2450 Coin Cell Battery.
Not intended as a zoning system. See eControlsUSA.com for
zoning solutions.
Compatible with R80CJ-XX Dampers (unsealed) or
R80JZD-XX Dampers (sealed).
Damper sold separately.
Made
in the
USA
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Contains Transmitter Module
FCC ID OA3MRF89XAM9A
Wireless Damper Control
24VAC, 4VA
eControls, Inc., Laguna Hills, CA
eControlsUSA.com
Patent US 10,520,212 B1
Model DDC2
WLDC Wireless Damper Control Wiring Diagram
WLDC Wireless Damper Control
Installed on any wall.
Wireless
DDC2 Damper Control Module
Installed near equipment
Made
in the
USA
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Contains Transmitter Module
FCC ID OA3MRF89XAM9A
Wireless Damper Control
24VAC, 4VA
eControls, Inc., Laguna Hills, CA
eControlsUSA.com
Patent US 10,520,212 B1
Model DDC2
2
R80CJ or R80JZD Damper.
Installed in the duct
controlling airflow to the space.
Plug&Play Cable Included
IN
OUT
IN
To 24VAC (R and C)
at the equipment or
24VAC, 40VA transformer.
Made
in the
USA
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Contains Transmitter Module
FCC ID OA3MRF89XAM9A
Wireless Damper Control
24VAC, 4VA
eControls, Inc., Laguna Hills, CA
eControlsUSA.com
Patent US 10,520,212 B1
Model DDC2
TS
TS
