Screened WeatherMaster™ 17'x9'
1
Layout & Positioning of
Tent
–Layout and position tent with screen room
facing desired direction. (illus. 1)
–Stake down tent, starting with
the corners. Do not stretch
too tight. Angle the Stakes
slightly toward the tent.
(illus. 2) Keep the floor taut.
–Stake down the remainder of
the stake loops–Unzip the door
2
Assemble & Place Roof
Poles
–Assemble all chain shock-corded
Roof Poles. When assembled will
form a continuous arch with both
ends pointing down. (illus. 3)
–Select Center Roof Pole with
Red stickers, then insert through
the center roof pole sleeve. (illus. 4)
–Select Front Roof Pole, with Red sticker,
then insert through the roof pole
sleeve at Front over Screen Room
(illus. 4)
–Select Rear Roof Pole, with Blue
sticker, then insert through the roof
sleeve at the Rear of tent (illus. 4)
When You Are Ready
To Set Up Your Tent
–Select a level campsite
clear of rocks, branches
and other hard or sharp
objects.
–Do not set up your tent
under trees.
–For best results in windy
conditions, position the
end of tent into the wind.
–See owners manual for
more tips.
Center Curved Roof Poles
(Red Sticker) Part No. 9232-372
Rear (Blue Sticker) Part No. 9232-373
Center Upright Poles
(Red Sticker) Part No. 9232A374
Rear Brace Poles
(Blue Sticker) Part No. 9232A375
Rainfly Part No. 9232-371
Instructions apply to Part Number 9232A379
Illus. 3 Curved Roof Pole assembly.
Illus. 4 Curved Roof Pole system shown
inserted through pole sleeve. Red
sticker poles go in center pole sleeve. Red sticker for
front sleeve and Blue sticker in rear pole sleeve.
Illus. 2
Stake loops
properly staked
Front of
Screen
Door
Roof Sleeve
Illus. 1
Roof Pole Sleeve
Chain corded poles
Forms an arch
Chain shock-corded
POLE ASSEMBLY PARTS
