Installation Instructions
for Loop CPU holder
C P U / 0 1 2
P A R T S I N C L U D E D :
Loop CPU
Holder
M8
Locknut
CPU-012-INST-B-SEPT 2017
WARNING
• Ensure desk is suitable to take the weight of the CPU holder and CPU.
• Do not use this product for any purpose other than that for which it was designed.
• Hold the CPU tightly when making adjustments.
• Care should be taken to avoid trapping fingers.
• Do not dismantle or modify the CPU cradle.
• Supported weight must not exceed 20kg (44.1lb) per cradle.
MAINTENANCE AND INSPECTION
• Ensure all screws and fixings are fully tightened and occasionally re-tighten if necessary.
• Clean with a dampcloth. DO NOT use solvents.
DISCL AIMER
• The use of power tools, lever bars or excessive force during the installation, or
reconfiguration of the product will invalidate your guarantee.
• Failure to observe the recommendations in the use, and configuration of these products
may affect your guarantee.
• As part of Colebrook Bosson Saunders ongoing product improvement programme, the
design of products may change without prior notice and details may vary from those illustrated.
CPU/012
Keyed metal
washer
Nylon
washer
Allen
Key
C P U D E S K F I T T I N G S U P P L I E D S E P E R A T E L Y
240
500
80 225
Min/Max CPU Dimensions
20
KG/44.1L
B
MAX
P A T E N T S
Colebrook Bosson Saunders hold a number of patents and other
intellectual property rights covering our products and processes.
You can find patent information on our website at:
www.colebrookbossonsaunders.com/patents
