Technical Brief
SLS-WAVE
qj
Point of
Administration Scanner
Overview
◆
The Codonics SLS-WAVE Point of Administration
Scanner is used in conjunction with the Safe Label
System
®
(SLS) Point of Care Station (PCS) and integrates
with Cerner SurgiNet Anesthesia Information
Management System (AIMS). The SLS and SLS-WAVE
are used together in the operating room to improve
safety and provide accurate, electronic documentation at
the time of preparation and administration.
Hardware Setup - SLS-WAVE/AIMS
1. Determine the location where the SLS-WAVE will be
installed. For example, below an AIMS monitor or
connected to an IV pole.
2. By default, the SLS-WAVE is shipped as if you are going
to connect it to the left-side of the AIMS monitor or to an
IV pole (see section
Connecting to an IV pole
).
SLS-WAVE Hardware Unpacking
1. Remove all the components from the box. It should
include:
◆
SLS-WAVE scanner (1)
◆
Back mounting bracket assembly (1)
◆
Clamp mounting assembly (1)
Note: An open USB port is required to connect SLS-
WAVE into the computer where the AIMS application is
operated.
