1
LED
Flex Strip
Contact here
Solderless Clamp
variety of settings and applications. Here’s how LED Light Strips can be readied for mounting in three easy steps:
Primary Features
•
•
• 12VDC operation.
Applications
• Back Lighting
• Cove Lighting
• Task Lighting
• Display Case Lighting
• Retail Lighting
• Sign Illumination
• Accent Decor Lighting
• Under Cabinet Lighting
• Automotive Accent Lighting
NFLS-x Series Flexible LED Flexible Light Strip
Simple Connection Steps
SAFETY TIPS
1. Cut along the light strip tape
wherever a dashed line divides
two sets of positive and negative
connection points.
Peel away a portion of the light strip adhesive
backing at one end. With the solderless clamp
open, slide the strip end all the way into the
solderless clamp. Close the hinged clamp.
Remove the remaining adhesive
backing and attach the light strip
to the desired surface.
Note: Polarity symbols should match
on each component.
LED Light Strip Handling:
• Do not stare directly into LED lights when illuminated.
• Always disconnect power supply before cutting/connecting
LED Light Strips.
• Do not expose LED Light Strips` to direct or indirect
moisture.
• Do not crimp light strip tape, attempt to bend light strips
width-wise, or length-wise to a radius less than 15mm.
Power Supply:
• Do not connect LED Light Strips directly to 120V AC power.
• Apply power to test LED Light Strips before mounting.
• Do not connect more than one 16.5’ section of light strips to
the included power supply. Overloading the included power
Installation Planning
Flexible LED Light Strips are highly versatile and can provide a superior lighting solution in a variety of applications. To maxi-
process.
Some general questions to ask in determining which installation design
best suits your lighting needs are:
• Where will your power supply be located?
•
•
• How will you run your wiring to your LED strip lighting?
Flexible LED Light Strips are designed to
provide indirect, accent-style lighting. Be
sure to install your LED lighting out of
direct sight.
This kit requires an UL Listed Class 2 12 VDC power supply.
Summary of Contents for NFLS-x Series
Page 6: ...6 ...
