Claypaky CL3018 Instruction Manual Download

Page: 1 / 20

INSTRUCTION MANUAL

Congratulations on choosing a Claypaky product!

We thank you for your custom.

Please note that this product, as all the others in the

rich Claypaky range, has been designed and made with

total quality to ensure excellent performance and best

meet your expectations and requirements.

INDEX

Page Contents

2 1. Safety information

3 2. Unpacking and preparation

4         3. Installation and start-up
4     3.1 Installing the fixture
5         3.2   Connecting to manis supply
5         3.3   Connecting the control signal line: DMX / Art-Net
6         3.4   Switching on the fixture and basic SetUp

8         4.     Maintenance
8     4.1 Opening the covers
9     4.2 Periodical cleaning

10   4.3   Effects module removal
14   4.4 Cleaning of the filters
15   4.5 Rotating gobos
17   4.6 Battery removal

18 5. Dimensions

18 6. Cause and solution of problems

SINFONYA PROFILE 600

CL3018

Summary of Contents for CL3018





















Search results

Summary of Contents for CL3018

Reviews:

Related manuals for CL3018

Brands by name

Popular brands

Claypaky CL3018, Instruction Manual

Search results

Summary of Contents for CL3018

Reviews:

Related manuals for CL3018

Brands by name

Popular brands