GREAT BRITAIN • CUSTOMER SERVICE
tel: 08545 300 9799 e-mail: [email protected] internet: www.clasohlson.com/uk
ENGLISH
V
er
. 20
131
00
1
Stopwatch
Art.no 36-4123
Please read the entire instruction manual before using the product and save it
for future reference. We reserve the right for any errors in text or images and
any neces-sary changes made to technical data. If you have any questions
regarding technical problems please contact Customer Services.
•
Stopwatch with 30 lap-times. Calculates quickest lap and average lap time.
•
Clock with dual time zones, timer, alarm and calendar. Lanyard and battery
included. Water resistant to 3 ATM.
Features
Time
Displays Hours/ Minutes / Seconds (in 12 or 24 hour format) and
Month / Date / Day.
Chronograph
Measures total time elapsed and can also show split times or lap times.
Chronograph data
Displays total time elapsed or per lap: Total time elapsed, Quickest lap and
Average lap time.
Timer
Programmable timer from 1 minute to 24 hours.
Button functions
•
S1 [ MODE ]
•
S2 [ SPLIT/RESET ]
•
S3 [ START/STOP ]
TIME (time display)
Timer (countdown timer)
S2
S3
S1
UK-4
UK-5
- Press S3 to toggle Time 1 and 2.
- To set TIME: Press S1 to scroll to Time Mode
if not already there.
- Press and hold S2 for 2 seconds to enter
settings. Time 1(T1) will start flashing.
Toggle with S3 to select Time 1 or 2. Press
S1 to confirm and proceed to hours.
- Press S3 to increase, S2 to decrease digits.
Hold the button for fast scrolling. Press S1
to confirm. The same setting method is
applied to Minutes, Seconds, Year, Month
and Day (Press either S2 or S3 to reset
Seconds). Press S1 to confirm.
- Press S3 to toggle 12/24 hour formats. If
24 hour format is selected, there will be no
AM/PM symbols. Press S1 to confirm.
- Press S3 to toggle ON/OFF. Press S1 to
confirm.
TIME mode
KEYS & FUNCTIONS
S1
S2
S3
S2|Split/Reset
- Enter
Settings
- Split
- Clear chrono-
graph data
-Decrease
Digits
S1|Mode
- Scroll
Modes
- Confirm
S3|Start/Stop
- Start/Stop/End
chronograph
- Start/Stop
alarm
- Store chrono
data
- Toggle
- Increase
Digits
Press
S3
[ START/STOP ]
to change
between time zones (Time1 and
Time2).
Setting the time
1. Press
S1
[ MODE ]
to reach the “TIME” mode (time display).
2. Press and hold in
S2
[ SPLIT/RESET ]
for about 2 seconds to enter
the settings mode. “Time1” will begin flashing.
3. Select time zone (T1 or T2) by pressing
S3.
Press
S1
to confirm and to
set the hours.
4. Press
S3
to increase or
S2
to decrease (keep the button depressed to
advance quickly).
5. Press
S1
to confirm.
6. Follow the same procedures for: Minutes – Seconds – Year – Month –
12/24 hour display.
7. Zero the seconds display by pressing
S1
or
S3
. (No AM/PM symbols are
visible when the 24 hour format is used). Turn the alarm signal ON/OFF
using
S3
. Press
S1
to confirm.
CRONO (chronograph)
UK-6
UK-7
Measure and record lap times and split
times up to 30 laps, with Fastest lap alarm.
To measure times with the chronograph:
- Press S3. The lap/split time display begins
with 1/100 seconds, then seconds, then
minutes. If the accumulated times in a
run proceed to hours, the elapsed hours
appear above the primary display and
replace 1/100 seconds in the secondary
display.
- The upper row of digits display the lap
time, and the lower row of digit display
the split time. The current lap number will
flash on the top row.
- Every time you finish one lap, press S2 to
record the lap time. The current recorded
lap will be flashing for 2 second. For any
fastest lap achieved, “FASTEST” will flash
on the top row for 2 seconds.
- The upper row of digits will return to show
the elapsed time for the next lap after the
flash. The lower row of digits will remain
displaying the split time non-stop.
- Press S3 to pause / stop the stopwatch.
Prompt “PAUSE” will be displayed and the
total elapsed time + current lap number
will flash alternatively. You can either press
S2 to resume the stopwatch, or you can
press S3 to end the stopwatch.
- If you want to store the chronograph data,
you can hold S3 for 2 seconds, and the
prompt “STORE DATA” will appear. It will
switch to another run after the data is
stored. (only when the session has ended.)
- If you want to clear the data, you can hold
S2 for 2 seconds to clear the chronograph
data. The prompt “ CLEAR ALL” will be
displayed while you hold the key, and it
will return to RUN –01. Please
note that ALL the data inside the Chrono
data will be erased, and the display will
return to RUN –01.
CHRONOGRAPH mode
Calculates and saves lap and split times.
Fastest lap time signal.
Using the chronograph
1. Press
S3
. Lap and split times will be shown. Display order: 1/100
seconds, seconds, minutes (and hours if applicable). The upper row
displays lap time and the lower row displays split time (the current lap time
will flash in the upper row).
2. Press
S2
after each lap to save the lap time. The saved lap time
will remain flashing for 2 seconds. If the current lap is the fastest
the “FASTEST” symbol will begin flashing in the upper row.
3. The upper row will then eventually return to normal time display for
the current lap. The lower row will display the total time elapsed and
then “Start”.
4. Press
S3
to “Pause”/“Stop” the time keeping. “PAUSE” will be displayed
and “Total time” + current lap number will flash alternately.
5. Press
S2
to restart timekeeping, or press
S3
to stop.
a. If you want to save the chronograph times press and hold in
S3
for
2 seconds until “STORE DATA” appears. The chronograph is now
ready for the next session after saving any current chronograph times.
b. If you DON’T want to save the chronograph times press and hold
in
S2
for 2 seconds until “CLEAR ALL” appears. The chronograph
is now ready for the next session and “RUN-01” will appear on the display.
Note:
The chronograph will be ready for reuse but all saved data will
be deleted.
UK-8
UK-9
Recall lap and split times for each indi-
vidual runs, lap times, total time,
fastest lap, and average times.
- To recall the chronograph data, press S2 to
browse the number of Runs you want to
recall. Press S3 to browse the data of the
Run session.
- Press S3 to browse the data lap by lap and
the sequence will be from: individual lap
time, total elapsed time, best lap time and
average lap time.
- Press and hold S2 for 2 seconds to enter
Set Mode. “HOLD / ADJUST” prompt will be
displayed for 1 second. The hour digit will
begin to flash.
- Press S3 to increase the digit, S2 to
decrease the digit. Hold the button for fast
scrolling. Press S1 to confirm and move to
Minute adjustment.
- After all adjustments are complete, press
S1 to exit set mode.
- Press S3 to start the countdown. Use S3 to
pause and resume the countdown.
- Press S1 to reset the countdown.
- Once the countdown reaches zero, the
stopwatch will start counting up to record
how long time has elapsed since the
countdown ended. Press S3 to pause and
S1 to reset.
- There will be an alert 5 seconds before the
countdown ends.
CHRONOGRAPH DATA mode
TIMER mode
UK-8
UK-9
Recall lap and split times for each indi-
vidual runs, lap times, total time,
fastest lap, and average times.
- To recall the chronograph data, press S2 to
browse the number of Runs you want to
recall. Press S3 to browse the data of the
Run session.
- Press S3 to browse the data lap by lap and
the sequence will be from: individual lap
time, total elapsed time, best lap time and
average lap time.
- Press and hold S2 for 2 seconds to enter
Set Mode. “HOLD / ADJUST” prompt will be
displayed for 1 second. The hour digit will
begin to flash.
- Press S3 to increase the digit, S2 to
decrease the digit. Hold the button for fast
scrolling. Press S1 to confirm and move to
Minute adjustment.
- After all adjustments are complete, press
S1 to exit set mode.
- Press S3 to start the countdown. Use S3 to
pause and resume the countdown.
- Press S1 to reset the countdown.
- Once the countdown reaches zero, the
stopwatch will start counting up to record
how long time has elapsed since the
countdown ended. Press S3 to pause and
S1 to reset.
- There will be an alert 5 seconds before the
countdown ends.
CHRONOGRAPH DATA mode
TIMER mode
6. Displaying stored data from each timekeeping session: Lap time,
total time, fastest lap and average lap time.
Return to any desired saved chronograph session by pressing
S2
the required number of times to reach it.
7. Press
S3
to display data for the desired session. Press
S3
to display
the data for each lap. Lap data is displayed in this order: Lap time,
total time, fastest lap and average lap time.
UK-8
UK-9
Recall lap and split times for each indi-
vidual runs, lap times, total time,
fastest lap, and average times.
- To recall the chronograph data, press S2 to
browse the number of Runs you want to
recall. Press S3 to browse the data of the
Run session.
- Press S3 to browse the data lap by lap and
the sequence will be from: individual lap
time, total elapsed time, best lap time and
average lap time.
- Press and hold S2 for 2 seconds to enter
Set Mode. “HOLD / ADJUST” prompt will be
displayed for 1 second. The hour digit will
begin to flash.
- Press S3 to increase the digit, S2 to
decrease the digit. Hold the button for fast
scrolling. Press S1 to confirm and move to
Minute adjustment.
- After all adjustments are complete, press
S1 to exit set mode.
- Press S3 to start the countdown. Use S3 to
pause and resume the countdown.
- Press S1 to reset the countdown.
- Once the countdown reaches zero, the
stopwatch will start counting up to record
how long time has elapsed since the
countdown ended. Press S3 to pause and
S1 to reset.
- There will be an alert 5 seconds before the
countdown ends.
CHRONOGRAPH DATA mode
TIMER mode
1. Press and hold in
S2
for approx. 2 seconds to
activate the “Settings Mode”. “HOLD/ADJUST”
will be displayed for 1 second. The hours display
will begin to flash.
2. Press
S3
to increase or
S2
to decrease. Keep the button depressed to
advance quickly. Press
S1
to confirm and to advance to the “Minutes”
setting.
3. Press
S1
when you have completed entering your settings and wish to
exit the settings mode.
4. Press
S3
to start the countdown. Press
S3
to pause/return to the countdown.
5. Push
S1
to reset the timer.
6. About 5 seconds before the countdown reaches 0 a warning buzzer will be
heard. Once the timer reaches 0 it will reverse and begin counting upwards.
Alarm
UK-10
UK-11
- Never attempt to disassemble or service
your stopwatch.
- Protect your stopwatch from extreme heat,
shocks and long time exposure to direct
sunlight.
- The stopwatch can be wiped clean with a
lightly moistened cloth. Apply mild soap
to the area if there are stubborn stains or
marks. Do not expose your stopwatch to
strong chemicals such as gasoline, clean
solvents, acetone, alcohol, insect repel-
lents, as they may damage the unit’s seal,
case and finish.
- Store your stopwatch in a dry place when
you are not using it.
- Avoid allowing the stopwatch to come into
direct contact with hair liquids, colognes,
sun block creams, and other toiletries,
which can cause deterioration of the plas-
tic parts of the stopwatch. Whenever the
stopwatch comes into contact with these
or other toiletries, wipe it off immediately
with a dry, soft cloth.
- You can toggle between ON/OFF by press-
ing S3. If the alarm function is “ON”, the
alarm icon will be visible.
- Press and hold S2 for 2 seconds to enter
Set Mode. “HOLD / ADJUST” prompt will be
displayed for 1 second. The hour digit will
begin to flash.
- Press S3 to increase the digit, S2 to
decrease the digit. Hold the button for fast
scrolling. Press S1 to confirm and move to
Minute adjustment.
- After all adjustments are complete, press
S1 to exit set mode.
- The alarm will sound for 30 seconds when
the alarm function is “ON”. Press any button
to stop the alarm sound.
ALARM mode
CARE & MAINTENANCE
1. Switch the alarm “OFF” and “ON”
by pressing
S3
. When the alarm is
activated (ON) an alarm (bell) symbol
will appear on the display.
2. Press and hold in
S2
for approx. 2 seconds to enter the Settings Mode.
“HOLD/ADJUST” will be displayed for 1 second. The hours display will
begin to flash.
3. Press
S3
to increase or
S2
to decrease. Keep the button depressed to
advance quickly. Press
S1
to confirm and to advance to the Minutes setting.
4. Press
S1
when you have completed entering your settings and wish
to exit the settings mode.
5. The alarm will sound for 30 seconds once the preset alarm time is reached,
if the alarm is activated. Push any button to turn off the alarm.
Care and maintenance
•
Never try to disassemble or repair the stopwatch.
•
Protect the stopwatch from extreme heat, knocks or blows, and
prolonged exposure to direct sunlight.
•
The stopwatch can be cleaned with a lightly moistened cloth. Add a little
mild detergent for stubborn grime. NEVER use strong solvents or cleaning
agents like petrol, thinners, alcohol, etc. These can damage the housing
and seals.
•
Store the stopwatch in a dry location when not in use.
•
Do not let the stopwatch come into contact with hair care products,
cologne, sun-block or other substances which can damage the housing.
If any of these substances come into contact with the stopwatch, wipe it
off immediately with a soft, dry washcloth.
Disposal
Follow local ordinances when disposing of this product. If you are unsure of
how to dispose of this product, please contact your municipality.
Specifications
Battery
CR2032 (3 V)
Water resistant
3 ATM
