background image

CWB1200P

Part Number: 4501500

Assembly Instructions

1207

17.

Drawer Back x 8

18.

Drawer Runner (Type ‘A’) L/H x 2

19.

Drawer Runner (Type ‘A’) R/H x 2

Polythene bag containing nuts, screws and
washers etc.
Polythene bag containing nuts, screws and
washers etc.

1

2

3

4

10

11

12

6

7

5

8

13

18

14

15

17

19

9

‘A’

‘B’

‘C’

15

Contents

1.

Left Leg x 1

2.

Right Leg x 1

3.

Upper Panel x 1

4.

Bottom Panel x 1

5.

Cross Panel x 1

6.

Back Panel x 1

7.

Bench Top x 1

8.

Drawer Runner (Type ‘B’) x 6

9.

Drawer Runner (Type ‘C’) x 6

10.

Foot x 4

11.

Screw M8x40 x 4

12.

Nut M8 x 4

13.

Drawer Front x 8

14.

Drawer Bottom x 8

15.

Drawer Side x16

Summary of Contents for CWB1200P

Page 1: ...Polythene bag containing nuts screws and washers etc 1 2 3 4 10 11 12 6 7 5 8 13 18 14 15 17 19 9 A B C 15 Contents 1 Left Leg x 1 2 Right Leg x 1 3 Upper Panel x 1 4 Bottom Panel x 1 5 Cross Panel x 1 6 Back Panel x 1 7 Bench Top x 1 8 Drawer Runner Type B x 6 9 Drawer Runner Type C x 6 10 Foot x 4 11 Screw M8x40 x 4 12 Nut M8 x 4 13 Drawer Front x 8 14 Drawer Bottom x 8 15 Drawer Side x16 ...

Page 2: ... lockwashers DO NOT tighten at this stage NOTE Top panel has cut out in the front lip for the cross panel to fit into 3 Attach the bottom panel 4 with the left leg 1 and loosely secure with screws nuts and lockwashers 4 Attach the Right leg 2 to the upper and lower panels and loosely secure with screws etc 5 Attach the cross panel 5 between the upper and lower panels Before loosely securing with s...

Page 3: ... to the prepared bench top as follows 1 Pull the sliding rails out to the front of bench top as far as possible 2 Fit drawer between rails 3 Line up the hole in the rail with the hole at the front of the drawer and secure with countersunk screw nut and lockwasher NOTE Countersunk screw must be fitted from inside the rail with the nut and lockwasher inside the drawer Once both drawers are fitted an...

Page 4: ... tongue s into the slots as in diag allow the runner to swing down in direction of arrow and come to rest against the leg hence holding itself in position no fixings are required Repeat for opposing runners 8 Type B in both sides of the cross panel PARTS SERVICE TEL 020 8988 7400 or e mail as follows PARTS Parts clarkeinternational com SERVICE Service clarkeinternational com Please note that the d...

Reviews: