background image

Part #s: 1

14628

Center Height: 

82

 inches

Foot Print: 

96" x 168"             

Hub-to-Hub: 1

00

 x 1

7

0 inches

Weight: 

50 lbs

Instruction #:

 10

6339

Please contact customer service directly at the E-mail or phone number listed below for any 

quality issues. ONCE USED THIS PRODUCT CANNOT BE RETURNED TO STORE. 

** Warranty cannot be honored without an original, dated receipt. ** 

Customer Service Hours: Monday – Friday 9am – 4pm Central Standard Time 
Phone: 
763-231-4120 
Email: 

[email protected]

  

IMPORTANT! Please read: This product is warrantied to the original retail purchaser (not transferable) to be free from 
manufacturer’s defects for one (1) year from the date of the original purchase. Warranty does not cover screen tears, 
tent tears, or broken or bent poles due to high wind, weather conditions or unattended use. The part will be replaced or 
repaired (manufacturer’s option) if found defective within the one (1) year time frame. Warranty will be void if product 
has been subject to neglect, misuse, improper installation, misapplication, alteration, or accident including, but not 
limited to, improper maintenance or use of unauthorized parts or attachments. Please read this entire owner’s manual 
to ensure proper installation, use, storage and care for your Clam shelter. 

To submit a warranty request, please use one of the following methods: 

Preferred Method - Visit 

www.QuickSetShelters.com

 under the “Customer Support” tab fill out the warranty

form.

Email

[email protected]

Write: Clam Outdoors - Warranty Department

o

12135 Brockton Lane N.

o

Rogers, MN 55369

Information needed to submit a warranty claim: Please include your full name, address, phone number, a copy of your 
receipt, a brief description of the problem, and pictures to clearly show the area(s) of concern. Clam’s warranty 
department will review your request and a Clam representative will contact you regarding your claim status. If 
instructed by the warranty department, all returns must be returned with postage prepaid. 

It  is  expressly  understood  that  Clam  Corporation’s  liability  for  its  products,  whether  due  to  breach  of  warranty, 
negligence, strict liability, or otherwise, is limited to the repair of the product as stated above. Clam Corporation is not 
liable for any injury, loss, damage, or expense, whether direct or consequential, including but not limited to loss of use, 
income,  profit,  or  damage  to  material  arising  in  connection  with  the  sale, installation,  use  of,  inability  to  use, or  the 
repair  or  replacement  of  Clam  Corporation  products.  Clam  Corporation  reserves  the  right  to  make  alterations  or 
modifications  in  its  products  at  any  time,  which  in  its  opinion,  may  improve  the  performance  and  efficiency  of  the 
product. Clam shall not be obligated to make such alterations or modifications to products already in service. 

WARRANTY INFORMATION 

LIMITATION OF LIABILITY 

Cabin Screen Tent

Summary of Contents for Quick-Set 114628









Reviews: