background image

Course Reference Material

Cisco Installing and Maintaining Routers Part 4: 12000 GSR Series and XS5032 Modules

NETg course 20614

Copyright © 2000 National Education Training Group, Inc.

All rights reserved. No part of the material protected by this copyright may be reproduced or utilized in any
form or by any means, electronic or mechanical, including photocopying, recording, broadcasting, or by any
information storage and retrieval system, without permission in writing from National Education Training
Group, Inc.

Skill Builder is a registered trademark of National Education Training Group, Inc. All other trademarks
referenced are the trademark, service mark, or registered trademark of their respective holders. National
Education Training Group, Inc. is not affiliated with any company or any other product or vendor mentioned
in this course and its accompanying materials.

The software and technology used to implement this course contain trade secrets that NETG considers to be
confidential and proprietary information, and your right to use this material is subject to the restrictions in the
license agreement under which you obtained it.

Contents

Objectives

Cisco 12000 Series GSR Routers

Cisco 12000 Router Installation

Cisco 12008 GSR

Cisco 12008 GSR: Installation

20614 Cisco Installing and Maintaining Routers Part 4: 12000 GSR Series and XS5032 Modules

1

Summary of Contents for 12000 GSR Series


















Reviews: