Installing a Christie One Mount Instruction Sheet
1
020-101410-05 Rev. 1 (09-2016)
Copyright © 2016 Christie Digital Systems USA Inc. All rights reserved.
Installing a Christie One
Mount/Christie One Mount
Plus
This document provides instructions for installing the Christie One Mount or Christie One Mount Plus
and optional accessories to mount Christie projectors to a ceiling or truss.
Safety precautions
Tools required
• 5mm hex key
• 3mm hex key
Parts Lists
Christie One Mount (P/N: 108-506102-XX)
Christie One Mount Plus (P/N: 140-117100-XX)
Christie One Mount Extender Rod (P/N: 121-125109-XX)
Christie One Mount Rigging Kit (P/N: 121-126100-XX)
Prerequisites
• Christie One Mount maximum projector weight limit is 25 kb (55 lbs).
• Christie One Mount Plus maximum projector weight limit is 45 kg (99 lbs).
Failure to comply with these safety precautions may result in serious injury, or even death.
• Only Christie qualified technicians are permitted to open product enclosures.
• SHOCK HAZARD! Disconnect the from AC before moving, servicing, cleaning, removing
components, or opening any enclosure.
• A minimum of two people or appropriately rated lift equipment is required to safely lift,
install, or move the product.
• FIRE HAZARD! Do not install near any devices that produce heat such as amplifiers,
radiators, heat registers, or stoves.
• Do not exceed the maximum load capacity of the product.
• Do not install on a structure susceptible to vibration, movement, or change of impact.
