CORDLESS 1-INCH
VINYL MINI BLIND
I
NSTRUCTIONS
PREPARATION
1
Check the Hardware
B
C
Spacer x 1
Wand x 1
Screw
23” - 36” = 4
39” - 58” = 6
70” - 72” = 8
23” - 36” = 2
39” - 58” = 3
70” - 72” = 4
23” - 36” = 2
39” - 58” = 3
70” - 72” = 4
D
A
Vinyl Blind x 1
2
Gather other necessary tools
E
Mounting Bracket
F
Tilter x 1
E
A
Click
E
A
E
D
Attach the
brackets
with the
screws
provided and tighten the
screws
in place.
Use the provided
spacers
when attaching
the
brackets
to the ceiling or when the depth
of the recess exceeds 1-1/2 inches.
Insert the top front of the
head rail
into the front
lip of the
brackets
. Push
the rail into place.
Attach the
brackets
with the
screws
provided and tighten the
screws
in place.
Marking Holes
Mark the screw holes at the back
or top of the
bracket
.
INSTALLATION | OUTSIDE MOUNT
INSTALLATION | INSIDE MOUNT
Installing Brackets
When mounting
brackets
on wall board
or plaster, use the
anchors.
Inserting
Use the spacers when
mounting to the ceiling.
The spacer provides the minimum
required space above the mounting
bracket to install the headrail of the
shade.
Marking Holes
Mark the screws holes at the
back or top of the
bracket
.
For wider widths and added
support, install the center
support bracket when provided.
Install at approximate center of
the headrail.
Installing Brackets
When mounting
brackets
on wall board
or plaster, use the
anchors.
Inserting
Insert the top front of the
head rail
into the front
lip of the
brackets
.
Push the
head rail
into
place.
Pre-drill holes for mounting
screws.
Pre-drill holes for mounting
screws and use level at top of
brackets
to ensure straight
alignment.
NOTE
E
E
E
D
A
E
E
E
E
D
C
E
D
B
A
E
E
A
Click
E
A
3
2
1
3
2
1
