Attention for Controlling:
Under the condition of wrong operation, charging to the lithium battery may
cause fire or injury or loss of property. The user should well notice the risk
hidden when using this kind of product. The manufacturer or sales agent or
retailer won’t take any responsibility for any accident happened. Please read
carefully the safe guidance and charging instruction before using this product.
Lithium Battery Safety Instruction
PLEASE CAREFULLY READ THE INSTRUCTION MANUAL BEFORE FLYING.
Please put the battery on the place where is far away from the children or
pets. User on or less than 18 years old should use this product under the
guidance of adult. Children under 14 years old should not operate it by its own.
The guarantee of this product is only for the raw materials and workshop but no
guarantee is given to this product. Under any circumstances, our company won’t
compensate the amount that higher than the retail price value.
1.It is highly forbidden to charge it for a long time under unattended condition so as to
avoid the accident.
2.Please use the original USB Charging Line included for charging this product.
3.It is highly forbidden to decompose or disassemble the battery.
4.Batteries are forbidden to be used or kept under high temperature or heat source or near
the flammable product.
5.When charging the battery, covering the charger or battery is highly forbidden. Please
keep ventilation and make sure that it should be charged under the condition of fire safety.
6.If the battery sends out smelly odor or gets heated or deformed or there is any abnormal
phenomenon happened during the process of charging, please remove the batteries from
the charging device or charger and move to the safety outdoor place (if there are batteries
which appear abnormal phenomenon, please DO NOT litter around. Please dispose it by
taking safe measure) so as not to cause combustion or explosion.
7.Batteries are forbidden to be stored or transported together with the metallic object.
8.Batteries are forbidden to be thrown into the fire or get heated.
9.Metal is forbidden to connect directly with the “+” “-” polarity of the battery.
10.It is highly forbidden to upside down the “+” “-” polarity of the battery.
11.If there any battery leakage happened or electrolyte liquid mistakenly goes into the eyes,
please do not rub the eyes but rinse the eyes with clear water.
12.When the battery is not used, please store it in the cool or dry environment.
Quad Copter
Main Rotor
Each Functions Introduction of Transmitter
Blade
Guarantee of the Lithium Battery
Illustration of Each Part
Flying Environment
Transmitter
Battery Charging
Operation and Control
Sensitivity Setting
Aerial Tumbling Skills
Left Side Flips
Right Side Flips
Accelerator Calibration
Stuck Protection and Activation
Trimming Adjustment Introduction
Front Flips
Back Flips
Begin to Take Off
Power Indicator
Ascend/ Descend
(Forward /
Backward)
Trimming
Ascend / Descend
(Forward /
Backward) /
Aileron (Left/Right
Sideward Fly / 3D
tumbling) Stick
Aileron Left / Right
Sideward Fly
Trimming
Aileron Left / Right
Sideward Fly
Trimming
Throttle/ Direction
/ High-speed and
Low-speed Stick
Ascend / Descend
(Forward /
Backward) /
Direction / 3D
Tumbling Stick
Ascend / Descend
(Forward / Backward)
Trimming
Throttle/ Aileron
(Left / Right Sideward
Fly / High-speed and
Low-speed) Stick
Connect the quad copter with the USB charging line, and then insert the USB charging
line into the USB port of the computer or any other USB chargers. When the USB indicator
is ON, that represents it is under charging. When the indicator is OFF, that represents it is
fully charged. Besides Apple charger, this USB charging wire can be connected with any
other chargers of Smart mobile or movable power or being charged on the USB interface
on the car. The voltage of the USB interface is +5+0.5V.
1.Switch on the transmitter and pull the
throttle stick to the lowest point.
2.Switch on the power of quad copter and put the quad copter on the level ground and
keep static. The indicator of the quad copter will be flashing.
3.Switch on the power of the transmitter and the transmitter will send out sounds of
“DI DI”, and then push the throttle stick to the highest (as Figure 2 shown). It will send out
sound of “DI” and then pull the throttle stick to the bottom (as Figure 3 shown) which
means that the decoding is successful. At the same time, the indicator of the quad copter
will stop flashing.
This kind of mini quad copter can realize three models operation: junior – intermediate
– senior
Gently press the throttle stick to enter the setting mode:
The beeper on the transmitter sounds “DI” – The quad copter enters the junior mode.
(with sensitivity of 30%)
The beeper on the transmitter sounds “DI DI” – The quad copter enters the intermediate
mode. (with the sensitivity of 50%)
The beeper on the transmitter sounds “DI DI DI” – The quad copter enters the senior mode.
(with the sensitivity of 70%)
3 modes can all be used to perform stunt action in the air, press the control stick and it will
send out sound of “DI” and then enter the Stunt Mode.
This model of quad copter can fly with 360 degree stunt action in the
air through operating the control stick on the transmitter. In order to
better carry out this stunt function and make sure the quad copter is
one meter height above the ground, you’d better operate stunt action
during the process of ascending, thus the quad copter will be easier
to keep the height after making stunt action.
Press the control stick, and push the aileron to the left side when hearing the
sound of “DI”.
Left Sideward
Fly Trimming
Right
Sideward
Fly Trimming
Right Side
Trimming
Left Side
Trimming
Press the control stick, and push the ascend/descend stick to backward when hearing
the sound of “DI”.
Press the control stick, and push the aileron to the right side when hearing the
sound of “DI”.
Press the control stick, and push the ascend/descend stick to forward when hearing
the sound of “DI”.
When the quad copter flies unstable or drifts quickly to one direction, you need to
calibrate the accelerometer.
1.After finishing the decoding between the quad copter and the transmitter, the quad
copter shall be placed on the level ground.
2.Set the sensitivity degree in the senior mode, and push the throttle to the lowest place.
3.Push the throttle/ direction control stick to the bottom-left corner and the ascend/
descend/aileron control stick to the up-left corner. At this time, the indicator of the quad
copter will be flashing for 1-2 seconds. Then the decoding is successful.
(Left-hand Throttle)
4.Push the ascend/descend control stick to the up-left corner and the throttle / aileron
control stick to the bottom-left corner. At this time, the indicator of the quad copter will
be flashing for 1-2 seconds. Then the decoding is successful. (Right-hand Throttle)
Note: If it is still driven to one direction, you can put it on the horizontal ground and
place several papers on that direction (the quantity of the papers needed is depending
on the driven level so that it can adjust the accelerometer horizontal angle of deviation).
When the propellers are stuck because of impacting or other reasons during the
flight, the battery protective board of the quad copter will automatically stop working.
You can cut off the power and reopen it under the circumstances of quite full power.
When the quad copter is without power after reopening, it means that the power is not
enough to activate the battery. You can use the equipped USB charging line to connect
the power and then make the activation.
Common Breakdown Maintenance of the R/C Aircraft
Troubleshooting
Main rotor don’t
work or drifting
take-off
Can’t take off
Maintenance Method
Return-on and decoding, and if the problem still can’t
be solved, check whether the propellers of the quad
copter are deformed or not. If they are deformed badly,
they should be replaced.
Recharge the quad copter if there is short battery. If
the problem still can’t be solved, you can make the
calibration according to the “Accelerometer
Calibration” of the manual.
The bigger the sensitivity, the faster the mini quad copter; the smaller the sensitivity,
the slower the mini quad copter.
Attention: Please avoid losing control. You should bear in mind that you need to operate
the control stick slowly when operating the quad copter. During the process of controlling,
the quad copter may lose some power. Therefore, during the courses of flying practice, you
need to add some extra power to keep this quad copter flying in a certain height.
Throttle Control the quad copter to make ascending and descending
Direction Stick Control the left rotation and right rotation of the quad copter.
Rudder Control the forward and backward of the quad copter
Aileron Control the quad copter of fly
horizontally to be left or to be right.
1.Open the battery
protective cover
of transmitter.
2.Install 2PCS 1.5V
“AAA” alkaline battery
(without battery).
3.Lock the protective
cover of the battery.
Please fly in the spacious indoor, and make sure there is no obstacles, animals or
humans nearby.
Please make sure that the appropriate environment should be suitable
before flying. When flying, don’t allow the quad copter beyond your sight.
Scope of control: The flying scope of the quad copter is about 25m and if beyond the scope, it would be
out of control.
Warning: If flying in strong wind, the quad copter may go beyond the control scope and the quad copter
would be out of control.
Flight time: The quad copter can fly within the scope under the condition of full charge and micro wind.
Please recharge it when found out the flight time is less than one minute.
The children should be under the guidance of adults when flying.
Switch
Switch
Please refer to the manual to ensure the correct flight operation.
Please don’t release the throttle
immediately when flying high,
otherwise, it would fall down
abruptly and causing
damages to parts.
The quad copter shall fly
to keep about 1m away
from the ground.
Don’t fly with too much
obstacles to avoid
unnecessary losses of it.
Battery Installation and Charging Ways
Battery Installation
Note: The battery shall be correctly installed as the
positive and negative plates pointed.
The correct starting sequences of opening program are as the followings:
trimming
trimming
trimming
NOTE: This equipment has been tested and found to comply
with the limits for a
Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are
designed to provide reasonable protection against harmful
interference in a
residential installation. This equipment generates uses
and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no
guarantee that interference will not occur in a particular
installation. If this
equipment does cause harmful interference to radio or
television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to
try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician
for help
Changes or modifications not expressly approved by the
party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause
undesired operation.
