Checkmate WG-01 Safe Use And Maintenance Instructions Download

Page: 1 / 16

UM-130_WG-01_IS0

Checkmate Lifting & Safety Ltd

New Road, Sheerness, Kent. ME12 1PZ United Kingdom

Tel: +44(0)1795 580333 Fax: +44 (0)1795 668280

www.checkmateuk.com

WG-01 SAFE USE

AND MAINTENANCE INSTRUCTIONS

THIS MANUAL IS WRITTEN IN ENGLISH. TRANSLATIONS ARE AVAILABLE ON REQUEST.

THIS MANUAL MUST BE SUPPLIED TO ALL PERSONNEL INTENDING TO USE THE

DEVICE.

WARNING!

Working at height is dangerous. This product is designed to reduce the risk of working at height,

by providing protection in the event of a fall to reduce the risk of injury. The product must be

used as intended, and the user must be trained, competent, and aware of the correct usage and

limitations of the product. The user and rescuer MUST be supplied with the manufacturers user

instructions and MUST read and fully u

nderstand and follow the instructions within. The user

must also comply with OSHA and local safety regulations.

Failure to follow these guidelines could result in injury or death.

Summary of Contents for WG-01

















Search results

Summary of Contents for WG-01

Reviews:

Related manuals for WG-01

Brands by name

Popular brands

Checkmate WG-01, Safe Use And Maintenance Instructions

Search results

Summary of Contents for WG-01

Reviews:

Related manuals for WG-01

Brands by name

Popular brands