background image

FEATURES 

For use with any Security

®

garage door openers having an

orange "learn" button.

Personalized Password:

Up to 10,000 possible 

combinations. Password can be easily changed if desired.

Temporary Password:

Can be added for visitors or service

persons. This temporary password can be limited to a 
programmable number of hours or a programmable number
of entries.

Rolling Code:

While your password remains constant until

you change it, the code between the Keyless Entry and the
receiver changes with each use, randomly accessing over
100 billion new codes.

Operation:

Opener activates when 4-digit password and

Enter button is pressed.
If wrong numbers are accidentally pressed, correction can be
made immediately. The Enter button will transmit only the
last four digits.
The Keypad will blink for 15 seconds after the password is
transmitted. During that time the Enter button can be used to
stop or reverse the door travel.

1

Model 940C Security

®

Wireless Keyless Entry

To prevent possible SERIOUS INJURY or DEATH from a moving
gate or garage door:
• ALWAYS keep remote controls out of reach of children.  NEVER

permit children to operate, or play with remote control 
transmitters.

• Activate gate or door ONLY when it can be seen clearly, is properly

adjusted, and there are no obstructions to door travel.

• ALWAYS keep gate or garage door in sight until completely closed.

NEVER permit anyone to cross path of moving gate or door.

WARNING

CAUTION

WARNING

WARNING

1. Enter a four digit personal identification 

number (PIN) of your choice on the keypad.
Then press and hold ENTER.

2. While holding the ENTER button, press and

hold the LIGHT button on the Multi-Function
Door Control.

3. Continue holding the ENTER and LIGHT

buttons while you press the push bar on the
Multi-Function Door Control (all three buttons
are held).

4. Release buttons when the motor unit lights

blink. It has learned the code. If light bulbs
are not installed, two clicks will be heard.

1. Press and release the “learn” button on motor

unit. The learn indicator light will glow 
steadily for 30 seconds.

2. Within 30 seconds, enter a four digit personal

identification number (PIN) of your choice on
the keypad. Then press and hold the ENTER
button.

3. Release the button when the motor unit lights

blink. It has learned the code. If light bulbs
are not installed, two clicks will be heard.

LOCK

LIGHT

SETTING THE PERSONAL ENTRY PASSWORD

We recommend that you program your password now, before you install the Keyless Entry. Then you can test  the reception
at the mounting location before you proceed further.

USING THE “LEARN” BUTTON

USING THE MULTI-FUNCTION DOOR CONTROL

Side two contains instructions for installing the Keyless
Entry, changing the personal entry password and 
setting a temporary password.

LOCK

LIGHT

LOCK

LIGHT

/

NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of
this receiver and/or transmitter are prohibited, except for changing the code setting or replacing
the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.

Summary of Contents for 940C Security+

Page 1: ...d hold ENTER 2 While holding the ENTER button press and hold the LIGHT button on the Multi Function Door Control 3 Continue holding the ENTER and LIGHT buttons while you press the push bar on the Multi Function Door Control all three buttons are held 4 Release buttons when the motor unit lights blink It has learned the code If light bulbs are not installed two clicks will be heard 1 Press and rele...

Page 2: ...pressing the new PIN then press ENTER The door should move TO SET A TEMPORARY PIN You may authorize access by visitors or service people with a temporary 4 digit PIN After a programmed number of hours or number of accesses this temporary PIN expires and will no longer open the door It can be used to close the door even after it has expired To set a temporary PIN 1 Press the four buttons for your p...

Page 3: ...dentification personnelle NIP à quatre chiffres de son choix sur le pavé numérique Enfoncer et tenir ensuite le bouton ENTER 3 Relâcher le bouton lorsque l éclairage du moteur clig note Il a appris le code Si les ampoules ne sont pas posées deux clics se feront entendre LOCK LIGHT DÉFINITION DU MOT DE PASSE PERSONNEL Nous vous recommandons de programmer votre mot de passe maintenant avant d instal...

Page 4: ... programmé d heures ou d accès ce mot de passe temporaire expire et n ouvrira plus la porte Le mot de passe temporaire peut être utilisé pour fermer la porte même après l expiration du code jusqu à program mation d un nouveau mot de passe temporaire Pour changer le mot de passe temporaire 1 Appuyer sur mot de passe personnel non le dernier mot de passe temporaire appuyer ensuite sur le bouton et l...

Reviews: