Central Pneumatic 92359 Set Up And Operating Instructions Manual Download

Page: 1 / 18

COIL ROOFING NAILER KIT

92359

SET UP AND OPERATING INSTRUCTIONS

Distributed exclusively by Harbor Freight Tools

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read and understand tool labels and

manual. Failure to follow warnings could

result in DEATH or SERIOUS INJURY.

SAVE THIS MANUAL.

2004, 2009 by Harbor Freight Tools

artwork contained herein may be reproduced in any shape or form without the express written consent of

Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Revised Manual 09g

Summary of Contents for 92359



















Search results

Summary of Contents for 92359

Reviews:

Related manuals for 92359

Brands by name

Popular brands

Central Pneumatic 92359, Set Up And Operating Instructions Manual

Search results

Summary of Contents for 92359

Reviews:

Related manuals for 92359

Brands by name

Popular brands