manualshive.com logo in svg
background image

Semi-Hollow Electric Synth Access Guitars

c

MADE IN

USA

MADE IN

USA

Controls

• humbucker volume control
• humbucker tone control
• stacked volumes for synth and acoustic
• stacked mid.cut boost and mid sweep controls
• stacked treble and bass cut/boost controls
• switch scrolls through MIDI patches when connected to synth

13-pin synth access port:

This 13-pin cable can carry 
hexaphonic synth access, 
piezo acoustic and humbucker 
audio when it is the only 
cable used.

SH575, SH65, SH275

1/4” Piezo output:

This output is for the 
acoustic piezo pickup.  
Connect this to an 
acoustic amplifier or 
PA system. 

1/4” Humbucker output:

This output is for the 
humbuckers.  Connect this 
to a guitar amp.

Battery replacement:

Carvin ships the SH575 with a brand new 9v battery.  The 
battery  is  required  for  the  active  Graph  Tech™  acoustic 
preamp.  Unplug the 1/4” cables when not in use to pre-
serve  battery  life.  Replace  the  battery  if  you  experience 
loss of audio or distorted acoustic sound.  A battery is not 
needed when the 13-pin cable is used exclusively. Leaving 
the 13-pin cable plugged in will not drain the battery. 

Changing Strings

When putting on a new set of strings, make sure the strings sit centered 
on the saddle as shown above. Improper installation over the saddle 
will result in tracking problems with the synth access.  You may use 
the intonation adjustment screws to move each saddle back and forth 
should this be required.  NEVER alter or modify the saddle shape or 
string  slot.  These  Graph  Tech™  saddles  are  actual  pickups  for  the 
acoustic and synth signals. 

Any attempt to file or alter the saddle will 

cause damage resulting in signal loss and will void the warranty.

Plugging In

Carvin’s Synth Access guitars open a whole new world of electric/acoustic/synth 

guitar.  These guitars are compatible with 13-pin standard (GK) hexaphonic 

synth access guitar devices as made by Roland and Axxon. The hexaphonic 

signals are converted to MIDI data inside a Roland or Axxon guitar synth, al-

lowing the connection of other MIDI devices to be chained and triggered from 

the guitar.  See the reverse side of this document for detailed diagrams.

SH275

SH575

SH65

Отзывы: