Magnivisor
Deluxe
™
LED Lighted Head Visor Magnifier
Congratulations on selecting your new Carson Visor Magnifier! In order
to achieve optimum performance, please follow instructions for proper
use and care.
PRODUCT SPECIFICATION
Magnification:
1.5x, 2x, 2.5x, 3x
Dimensions:
7.6" x 2.3" x 9.7"
Lens Width:
4"
Batteries:
3 AAA (not included)
Weight:
0.33 lbs
Accessories:
Microfiber Cloth and 4 Lenses in Protective Case
INSTALLING BATTERIES
1. Turn Magnivisor
™
over and place one hand
underneath removable LED Lamp. With the
opposite hand, use a tool such as a pen
and insert into hole to push LED Lamp out
from compartment.
Important:
DO NOT PULL LED LAMP
FROM VISOR. Push from underneath to
avoid damaging the light.
2. Press lever to remove battery door and insert 3 AAA
batteries in the correct polarity. Reattach battery
3. Return LED Lamp to top of visor, or use separately
as a table light or flashlight. LED Lamp is also magnetic
and can attach to any metal surface. If not using
with visor, included insert will fill the compartment.
WARNING:
Use only alkaline batteries. Mixing old and new, different brands or types within brands may cause
batteries to leak, overheat or explode. Keep away from fire or excessive heat. Inspect batteries for corrosion or
leakage. Insert in direction indicated. Rechargeable batteries not recommended.
INSERTING / REMOVING LENSES
1. Select desired lens from protective case.
2. Insert lens tabs into holder located underneath the visor. There will be
an audible click when locked into place.
Please note:
The flat part of the lens should face inward. The curved
portion should face out.
3. Gently pull on lens to remove from holder and return to case when done.
1
CP-60
door when done.
